The effect of additives and masterbatch to improve the properties of recycled polyolefins
Subject Areas :
Hamidreza
Haydari
1
(دانشگاه صنعتی امیرکبیر)
marziyeh
hosseini
2
(iran polymer & petrochemical institute)
Keywords: Plastics, recycling, additive masterbatches, physical and mechanical properties, polyolefin,
Abstract :
Although the recycling of polymer products is beneficial for the environment and economy, the main goal is to achieve the efficiency of raw (intact) polymers in recycled polymers. The best type of recycling to have maximum energy efficiency and minimum environmental consequences is mechanical recycling. However, there are a number of differences between virgin and recycled polymers. Due to the structural changes and the presence of impurities in the polymer, it is difficult to achieve a quality recycling. Whether the recycled polymer is suitable for obtaining new applications or not is measured by mechanical tests (such as tensile test, impact test), physical tests (such as hydraulic stability, surface roughness) and operational tests (extrusion and molding) under standard conditions. When these tests are performed, most recycled polymers do not meet the requirements required for various applications, unless we use additives that improve their properties. These additives may include coupling agents, impact improvers, metal deactivators, melt flow regulators, antioxidants, masterbatches, etc., and each is used in some way to improve specific properties of the polymers. Although the recycling of polymer products is beneficial for the environment and economy, the main goal is to achieve the efficiency of raw (intact) polymers in recycled polymers.
1. https://insights.globalspec.com/article/14792/how-to-recycle-polymer.
2. Geyer, R., Jambeck, J. R., & Law, K. L. “Production, use, and fate of all plastics ever made”. Science advances, 3(7), e1700782, 2017.# 3. Pfaendner, R. “Additives to upgrade mechanically recycled plastic composites”. In Management, Recycling and Reuse of Waste Composites. Woodhead Publishing, pp.253-280, 2010.
4. Ding, Q., & Zhu, H. “The key to solving plastic packaging wastes: Design for recycling and recycling technology”. Polymers, 15(6), 1485, 2023.
5. Akbari, M., Zadhoush, A., & Haghighat, M. “PET/PP blending by using PP‐g‐MA synthesized by solid phase”. Journal of applied polymer science, 104(6), 3986-3993, 2007.
6. Geyer, B., Lorenz, G., & Kandelbauer, A. “Recycling of poly (ethylene terephthalate)–A review focusing on chemical methods”. Express Polymer Letters, 10(7), 559-586, 2016.
7. Strangl, M., Ortner, E., & Buettner, A. “Evaluation of the efficiency of odor removal from recycled HDPE using a modified recycling process”. Resources, conservation and recycling, 146, 89-97, 2019.
8. Strangl, M., Fell, T., Schlummer, M., Maeurer, A., & Buettner, A. “Characterization of odorous contaminants in post‐consumer plastic packaging waste using multidimensional gas chromatographic separation coupled with olfactometric resolution”. Journal of separation science, 40(7), 1500-1507, 2017.
9. Zdiri, K., Elamri, A., Hamdaoui, M., Harzallah, O., Khenoussi, N., & Brendlé, J. “Reinforcement of recycled PP polymers by nanoparticles incorporation”. Green Chemistry Letters and Reviews, 11(3), 296-311, 2018.
10. Latkin, C.A., Dayton, L., Yi, G. and Balaban, A., “The (Mis) Understanding of the Symbol Associated with Recycling on Plastic Containers in the US: A Brief Report.” Sustainability, 14.15, 9636, 2022.
11. https://www.plasticsforchange.org/blog/which-plastic-can-be-recycled.
12. Geyer, B., Lorenz, G., & Kandelbauer, A. “Recycling of poly (ethylene terephthalate)–A review focusing on chemical methods”. Express Polymer Letters, 10(7), 559-586, 2016.
13. Güçlü, G., Yalçınyuva, T., Özgümüş, S., & Orbay, M. “Hydrolysis of waste polyethylene terephthalate and characterization of products by differential scanning calorimetry”. Thermochimica Acta, 404(1-2), 193-205, 2003.
14. Geyer, B., Lorenz, G., & Kandelbauer, A. “Recycling of poly (ethylene terephthalate)–A review focusing on chemical methods”. Express Polymer Letters, 10(7), 559-586, 2016.
15. Awaja, F., & Pavel, D. “Recycling of PET”. European polymer journal, 41(7), 1453-1477, 2005.
16. Kratofil Krehula, L., Hrnjak-Murgić, Z., & Jelenčić, J. “Study of masterbatch effect on miscibility and morphology in PET/HDPE blends”. Journal of Adhesion Science and Technology, 29(2), 74-93, 2015.
17. Clarke, J., Clarke, B., Freakley, P. K., & Sutherland, I. “Compatibilising effect of carbon black on morphology of NR–NBR blends”. Plastics, rubber and composites, 30(1), 39-44, 2001.
18. Lindqvist, K., Andersson, M., Boss, A., & Oxfall, H. “Thermal and mechanical properties of blends containing PP and recycled XLPE cable waste”. Journal of Polymers and the Environment, 27, 386-394, 2019.