Different fabrication methods and ideal properties of scaffolds for tissue engineering applications.
Subject Areas :Mohammad Rasouli 1 , Soheila Kashanian 2
1 - University of Razi
2 - Razi University
Keywords: Tissue engineering, scaffold, stem cells, nanotechnology,
Abstract :
Tissue engineering is a science that uses the combination of scaffolds, cells and active biomolecules to make a tissue in order to restore or maintain the function and improve the damaged tissue or even an organ in the laboratory. Artificial skin and cartilage are among the engineered tissues that have been approved by the US Food and Drug Administration (FDA) for clinical use. Accuracy in the design and fabrication of scaffolds with ideal properties such as biocompatibility, biodegradability, mechanical and surface properties is very important for applications in tissue engineering. Furthermore, these techniques should be able to translate the fabricated scaffolds from potential to actual applications. Several fabrication technologies have been used to design ideal 3D scaffolds with controlled nano- and micro-structures to achieve the ultimate biological response. This review highlights the applications and ideal parameters (biological, mechanical and biodegradability) of scaffolds for various biomedical and tissue engineering applications. This review discusses in detail the various design methods developed and used to design scaffolds, namely solvent casting/particle leaching, freeze drying, thermally induced phase separation (TIPS), gas foaming. (GF), powder foam, sol-gel, electrospinning, stereolithography (SLA), fused deposition modeling (FDM), selective laser sintering (SLS), jet binder technique, inkjet printing, laser-assisted bioprinting, writing It reviews direct cell and metal-based additive manufacturing, focusing on their advantages, limitations, and applications in tissue engineering.
1. Jayabalan M., Studies on Poly (Propylene Fumarate-Co-Caprolactone Diol), International Journal of Biomaterials, 12, 20-28, 2009.
2. Rahmani Del Bakhshayesh A., Annabi N., Khalilov R., Akbarzadeh N., Samiei M., Recent Advances on Scaffold, Cell Nanomed. Biotechnol, 64, 691-705, 2018.
3. Lange R., "D.A. Tirrell Designing Materials for Biology and Medicine, Nature, 24, 487-492, 2004.
4. Knight R., Wilcox H., Korossis S., Fisher J., Ingham E., The Use of Acellular Matrices for the Tissue Engineering of Cardiac Valves, Proc. IME H J. Med, 222, 1, 129-143, 2008.
5. Norouzi N., Soleimani M., Shabani I., Atyabi F., Ahvaz H., Rashidi A. , Protein Encapsulated in Electrospun Nanofibrous Scaffolds for Tissue Engineering, Polym. Int, 62, 1250-1256, 2013.
6. Wang F., Wang M., She Z., Fan K., Xu C., Chu B., Chen C., Shi S., Tan R., Collagen/Chitosan Based Two-Compartment and Bi-Functional Dermal Scaffolds for Skin, Mater. Sci. Eng. C, 52, 155-162, 2015.
7. Zhong S.P., Zhang Y.Z., Lim C.T., Tissue Scaffolds for Skin Wound Healing and Dermal Reconstruction, Wiley Interdiscipl. Rev.: Nanomed. Nanobiotechnol, 2, 210-525, 2010.
8. Nosrati H., Aramideh Kh., Nosrati R., Khodaei A., Banitalebi-Dehkordi M ., Nano Composite Scaffolds for Accelerating Chronic Wound Healing by Enhancing Angiogenesis, J. Nanobiotechnol, 19, 1-21, 2021.
9. Negut I., Dorcioman G., Grumezescu V., Scaffolds for Wound Healing Applications, Polymers, 20, 9-12, 2020.
10. Jana S., Tefft B., Spoon J ., Simari D.B., Scaffolds for Tissue Engineering of Cardiac Valves, Acta Biomater, 10, 2877-2893, 2014.
11. Jana S., Tefft B.J., Spoon D.B., Simari R.D., "Scaffolds for Tissue Engineering of Cardiac Valves, Acta Biomater, 11, 2877-2893, 2018.
12.Eltom A., Zhong G., Muhammad A., Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes: A Review, Advances in Materials Science and Engineering, 2, 25-36, 2020.
13. Eltom A., Zhong G., Muhammad A., Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes, Advances in Materials Science and Engineering, 25, 120-131, 2019.
14. Sultana N., Mechanical and Biological Properties of Scaffold Materials, In Functional 3D Tissue Eng. Scaffolds, 12, 1-21, 2021.
15. Sultana N ., Mechanical and Biological Properties of Tissue Materials, In Functional 3D Tissue Eng. Scaffolds, Prairie View A&M University, USA, 1-21, 2018.
16. Yang Y.L., Kaufman L. J., Motte S., Pore Size Variable Type I Collagen Gels and Their Interaction With Glioma Cells, Biomaterials, 21, 5676-5688, 2010.
17. Brown B.N., Valentin J.E., Stewart-Akers A.M., McCabe G.P., Badylak S.F., Macrophage Phenotype and Remodeling Outcomes in Response to Biologic Scaffolds With and Without a Cellular Component, Biomaterials, 30, 1482-1491, 2017.
18. Siritientong T., Srichana T., Aramwit P., The Effect of Sterilization Methods on the Physical Properties of Silk Sericin Scaffolds, AAPS PharmSciTech, 12, 771-781, 2017.
19. Horakova J., Klicova M., Erben J., Klapstova A., Novotny V., Behalek L., Impact of Various Sterilization and Disinfection Techniques on Electrospun Poly-ε-Caprolactone, ACS Omega, 5, 8885-8892, 2020
20. Łopianiak I., Butruk-Raszeja B.A., Evaluation of Sterilization/Disinfection Methods of Fibrous Polyurethane Scaffolds Designed for Tissue Engineering Applications, Int J. Mol. Sci, 21, 80-92, 2020.
21. Toth J.M., Anab H.S., Lim T.H., Ran Y., Weiss N.G., Lundberg W.R., Xu R.M., Lynch K.L., "Evaluation of Porous Biphasic Calcium Phosphate Ceramics for Anterior Cervical Interbody Fusion in a Caprine Model,. Spine, 20, 2203-2210, 2013.
22. Ribas R.G.,Schatkoski V.M., Do Amaral Montanheiro T.L., De Menezes B.R., Stegemann C., Leite D.M., Thim G.P., Current Advances in Bone Tissue Engineering Concerning Ceramic and Bioglass Scaffolds: A Review, Ceram. Int, 17, 21051-21061, 2019.
23. Nikolova M.P., Chavali M.S., Recent Advances in Biomaterials for 3D Scaffolds: A Review, Bioact. Mater, 4, 271-292, 2019.
24. Asadi N., Del Bakhshayesh A.R., Davaran S., Akbarzadeh A., Common Biocompatible Polymeric Materials for Tissue Engineering and Regenerative Medicine, Mater. Chem. Phys, 24, 12-28, 2020.
25. Yoon D.M., Fisher J.P., Natural and Synthetic Polymeric Scaffolds, Biomedical Materials, Springer Cham, Switzerland, 257-283, 2021.
26. Ghassemi T., Shahroodi A., Ebrahimzadeh M.H., Mousavian A., Movaffagh J., Moradi A., "Current Concepts in Scaffolding for Bone Tissue Engineering, Arch. Bone Joint Surg, 2, 20-32, 2018.
27. Soundarya S.P., Menon A.H., Chandran S.V., Selvamurugan N., Bone Tissue Engineering: Scaffold Preparation Using Chitosan and Other Biomaterials With Different Design and Fabrication Techniques, J. Biol. Macromol, 119, 1228-1239, 2018.
28. Tonda-Turo C., Boffito M., Cassino C., Gentile P., Ciardelli G., Biomimetic Polyurethane–Based Fibrous Scaffolds, Mater. Lett, 16, 9-12, 2016.
29. Asadi N., Alizadeh E., Salehi R., Khalandi B., Davaran S., Akbarzadeh A., Nano Composite Hydrogels for Cartilage Tissue Engineering: A Review, Artif. Cell Nanomed. Biotechnol, 46, 465-471, 2020.
30. Matsuda S., Taniguchi N., Fujibayashi S., Takemoto M., Sasaki K., Otsuki B., Nakamura T., Matsushita T., Kokubo T., Effect of Pore Size on Bone Ingrowth Into Porous Titanium Implants Fabricated by Additive Manufacturing: An In-vivo Experiment., Mater. Sci. Eng. C, 59, 690-701, 2016.
31. Raucci M.G., Guarino V., Ambrosio L., Hybrid Composite Scaffolds Prepared by Sol–Gel Method for Bone Regeneration, Compos. Sci. Technol, 70, 1861-1868, 2017.
32. Yao H., Wang J., Mi S., Photo Processing for Biomedical Hydrogels Design and Functionality: A Review, Polymers, 10, 25-35, 2017.
33. Akriti S., Jugal T., Punuri B., Babu J., Various Manufacturing Methods and Ideal Properties of Scaffolds for Tissue, Smart Materials in Manufacturing, 2, 22-32, 2023.
34. Eldesouky I., Harrysson O., West H., Elhofy H., Electron Beam Melted Scaffolds for Orthopedic Applications, Addit. Manuf, 17, 169-175, 2019.
35. Xie Y., Sutrisno L., Yoshitomi T., Kawazoe N., Yang Y., Chen G., Three Dimensional Culture and Chondrogenic Differentiation of Mesenchymal Stem Cells in Interconnected Collagen Scaffolds, Biomed. Mater, 17, 34-43, 2022.
36. Langer R., Tirrell D.A., Designing Materials for Biology and Medicine, Nature, 24, 487-492, 2015.
37. Behravesh E., Mikos A.G., Three-Dimensional Culture of Differentiating Marrow Stromal Osteoblasts in Biomimetic Poly (Propylene Fumarate-co-Ethylene Glycol), J. Biomed. Mater, 22, 698-706, 2018.
38. Clements I.P., Kim Y.T., English A.W., Lu X., Chung A., Bellamkonda R.V., Thin Film Enhanced Nerve Guidance Channels for Peripheral Nerve Repair, Biomaterials, 23, 3834-3846, 2019.
39. Mousa M., Evans N.D., Oreffo R.C., Dawson J., Clay Nanoparticles for Regenerative Medicine and Biomaterial Design: A Review of Clay Bioactivity, Biomaterials, 2, 25-36, 2017.
40. Yadav V., Roy S., Singh P., Khan Z., Jaiswal A., 2D MoS2 - Based Nano Materials for Therapeutic, Bioimaging, and Biosensing Applications, Small, 21, 27-40, 2019.
41. Yang J., Yang YW., Metal-Organic Frameworks for Biomedical Applications, Small, 12, 21-36, 2020.