-
Subject Areas :
rasoul
mohsenzadeh
1
(tabriz)
Keywords: -,
Abstract :
-
1. Mohsenzadeh R., et al., Wear and failure of polyoxymethylene/calcium carbonate nanocomposite gears, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1350650119867530, 2019.
2. Soudmand B. and K. Shelesh-Nezhad, Study on the gear performance of polymer-clay nanocomposites by applying step and constant loading schemes and image analysis, Wear, 458, 203412, 2020.
3. Soudmand B. and K. Shelesh-Nezhad, Failure and wear analysis of poly (butylene terephthalate) nanocomposite spur gears, Tribology International, 151, 106439, 2020.
4. Zhang Y., et al., A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears, Tribology International, 141, 105953, 2020.
5. Černe B., et al., Thermo-mechanical modeling of polymer spur gears with experimental validation using high-speed infrared thermography, Mechanism and Machine Theory, 146, 103734, 2020.
6. Letzelter E., et al., A new experimental approach for measuring thermal behaviour in the case of nylon 6/6 cylindrical gears, Polymer testing, 29, 8, 1041-1051, 2010. 7. Kim C.H., Durability improvement method for plastic spur gears, Tribology International, 39, 11, 1454-1461, 2006.
8. Tsukamoto N., Effect of reducing friction of polyacetal in gears (3rd Report, Polyacetal Homopolymer Filled with Fluorine-Containing Resin), Trans. Jpn. Soc. Mech. Eng. C, 58, 545, 231, 1992.
9. Senthilvelan S. and R. Gnanamoorthy, Effect of gear tooth fillet radius on the performance of injection molded Nylon 6/6 gears, Materials & design, 27, 8, 632-639, 2006.
10. Düzcükoğlu H., R. Yakut, and E. Uysal, The use of cooling holes to decrease the amount of thermal damage on a plastic gear tooth, Journal of failure analysis and prevention, 10, 6, 545-555, 2010.
11. Düzcükoğlu H., Study on development of polyamide gears for improvement of load-carrying capacity, Tribology International, 42, 8, 1146-1153, 2009.
12. İmrek H., Width modification for gears with low contact ratio, Meccanica, 44, 5, 613-621, 2009.
13. İmrek H., Performance improvement method for Nylon 6 spur gears, Tribology International, 42, 3, 503-510, 2009.
14. Nozawa J.-i., et al., Tribological properties of polymer-sheet-adhered metal hybrid gear, Wear, 266, 9-10, 893-897, 2009.
15. Nozawa J.-i., et al., Tribology of polymer injection-molded stainless steel hybrid gear, Wear, 266, 7-8, 639-645, 2009.