-
Subject Areas :
1 - jahad
Keywords: -,
Abstract :
-
References:
[1] Cáceres C.A., Mazzola N., França M., Canevarolo S.V., Controlling in-Line the Energy Level Applied During the Corona Treatment, Polymer Testing, 31, 505-511, 2012.
[2] Llop C., Manrique A., Navarro R., Mijangos C., Control of the Migration Behavior of Slip Agents in Polyolefin-Based Films, Polymer Engineering and Science, 51, 1763-1769, 2011.
[3] Patel P., Savargaonkar N., A Review of Additives for Plastics: Slips and Antiblocks, Plastics Engineering, 63, 48-51, 2007.
[4] Markarian J., Slip and Antiblock Additives: Surface Medication for Film and Sheet, Plastics Additives and Compounding, 9, 32-35, 2007.
[5] Nayak K., Tollefson N.M., An Experimental Design Approach: Effect of Slip and Antiblocking Agents on the Performance of Polymer, Journal of Plastic Film and Sheeting, 16, 84-94, 2000.
[6] Wypych G., 'Handbook of Antiblocking, Release, and Slip Additives, ChemTec Publishing, Canada, 2005.
[7] Hadi N.H.N., Abidin M.F.Z., Shuib R.K., Roles of Slip Agent in Blown Film Extrusion of Linear Low Density Polyethylene, Journal of Engineering Science, 14, 61–70, 2018.
[8] Drobny J.G., Handbook of Thermoplastic Elastomers, William Andrew, New York, 2007. [9] Tolinski M., Additives for Polyolefins: Getting the Most out of Polypropylene, Polyethylene and TPO, William Andrew, USA, 2015.
[10] Cooper I., Tice P.A., Migration Studies on Fatty Acid Amide Slip Compounds From Plastics Into Food Simulants, Food Additives and Contaminants, 12, 235-244, 1995.
[11] Mansha M., Gauthier C., Gerard P., Schirrer R., The Effect of Plasticization by Fatty Acid Amides on the Scratch Resistance of PMMA, Wear, 271, 671–679, 2011.
[12] Hamzah A.F., Al-kawaz A., Study of Mechanical Properties of Wollastonite Filled Epoxy Functionally Graded Composite Noor Bayan Muslim, International Journal of Mechanical Engineering and Technology, 9, 669–677, 2018.
[13] Maltby A., Marquis R.E., Slip Additives for Film Extrusion, Journal of plastic film and sheeting, 14, 111-120, 1998.
[14] Wang L., He H., Lin R., Wu Z., Wang Q., Study on Ameliorating Friction Noise of ABS Materials by Lubrication, Polymer Testing, 82, 106307, 2020.
[15] Rojsatean J., Larpsuriyakul P., Prakymoramas N., Thanomjitr D., Friction Characteristics of Self-lubricating ABS Under Different Surface Roughnesses and Temperatures, Tribology International, 109, 229–237, 2017.
[16] Izmitli A., Ngunjiri J., Lan T., Pacholski M.L., Smith R., Impact of Silicone Additives on Slip/Mar Performance and Surface Characteristics of Waterborne Acrylic Coatings, Progress in Organic Coatings, 131, 145–151, 2019.
[17] Bryant K.A.A., Understanding Coefficient of Friction in Coextruded Films, Polymer Laminations Coating Conference, 18-4, 969-77, 1998.
[18] Soutar A., The Fugitive: Slip, Polymer Laminations Coating Conference, 10-2, 319-28, 1996.
[19] Coelho F., Vieira L., Benavides R., Paula M., Bernardin A.M., Magnago R.F., Synthesis and Evaluation of Amides as Slip Additives in Polypropylene, International Polymer Processing Journal of the Polymer Processing Society, 30, 574-584, 2015.
[20] Antoine K.K., Multilayer Flexible Packaging: Additives to Design and Improve the Performance of Multilayer Flexible Packaging, William Andrew, USA, 2016.
[21] Esche G.V., Kromminga T., Schmidt A., New Highly Efficient Silica Antiblocking Aids for PE and PP Films, Social Plastic Engineering conference, 3, 2837-2842, 1998.
[22] Radosta J.A., Riley W.D., Treated Talc as an Effective Anti-Block for LDPE Blown Film, Journal of Plastic Film and Sheeting, 7, 247-258, 1991.
[23] Wooster J.J., Simmons B.E., Optimizing CoF, Seal Performance, and Optical Properties of Polyolefin Plastomers, Journal of Plastic Film and Sheeting, 12, 50-67, 1996.
[24] Coupland K., Maltb, A., Modification of the Surface Properties of Polyethylene Plastomer Films by the use of Additives, Journal of Plastic Film and Sheeting, 13, 142-149, 1997.
[25] Essche G.V., Kromminga T., Schmidt A., New Highly Efficient Silica Anti-Blockingaids for PE and PP Films, Journal of Plastic Film and Sheeting, 16, 155-168, 2000.
[26] Huang Y., Xiong Y., Liu C., Lia L., Single-crystalline 2D Erucamide with Low Friction and Enhanced Thermal Conductivity, Colloids and Surfaces A, 540, 29–35, 2018.
[1] Cáceres C.A., Mazzola N., França M., Canevarolo S.V., Controlling in-Line the Energy Level Applied During the Corona Treatment, Polymer Testing, 31, 505-511, 2012.
[2] Llop C., Manrique A., Navarro R., Mijangos C., Control of the Migration Behavior of Slip Agents in Polyolefin-Based Films, Polymer Engineering and Science, 51, 1763-1769, 2011.
[3] Patel P., Savargaonkar N., A Review of Additives for Plastics: Slips and Antiblocks, Plastics Engineering, 63, 48-51, 2007.
[4] Markarian J., Slip and Antiblock Additives: Surface Medication for Film and Sheet, Plastics Additives and Compounding, 9, 32-35, 2007.
[5] Nayak K., Tollefson N.M., An Experimental Design Approach: Effect of Slip and Antiblocking Agents on the Performance of Polymer, Journal of Plastic Film and Sheeting, 16, 84-94, 2000.
[6] Wypych G., 'Handbook of Antiblocking, Release, and Slip Additives, ChemTec Publishing, Canada, 2005.
[7] Hadi N.H.N., Abidin M.F.Z., Shuib R.K., Roles of Slip Agent in Blown Film Extrusion of Linear Low Density Polyethylene, Journal of Engineering Science, 14, 61–70, 2018.
[8] Drobny J.G., Handbook of Thermoplastic Elastomers, William Andrew, New York, 2007. [9] Tolinski M., Additives for Polyolefins: Getting the Most out of Polypropylene, Polyethylene and TPO, William Andrew, USA, 2015.
[10] Cooper I., Tice P.A., Migration Studies on Fatty Acid Amide Slip Compounds From Plastics Into Food Simulants, Food Additives and Contaminants, 12, 235-244, 1995.
[11] Mansha M., Gauthier C., Gerard P., Schirrer R., The Effect of Plasticization by Fatty Acid Amides on the Scratch Resistance of PMMA, Wear, 271, 671–679, 2011.
[12] Hamzah A.F., Al-kawaz A., Study of Mechanical Properties of Wollastonite Filled Epoxy Functionally Graded Composite Noor Bayan Muslim, International Journal of Mechanical Engineering and Technology, 9, 669–677, 2018.
[13] Maltby A., Marquis R.E., Slip Additives for Film Extrusion, Journal of plastic film and sheeting, 14, 111-120, 1998.
[14] Wang L., He H., Lin R., Wu Z., Wang Q., Study on Ameliorating Friction Noise of ABS Materials by Lubrication, Polymer Testing, 82, 106307, 2020.
[15] Rojsatean J., Larpsuriyakul P., Prakymoramas N., Thanomjitr D., Friction Characteristics of Self-lubricating ABS Under Different Surface Roughnesses and Temperatures, Tribology International, 109, 229–237, 2017.
[16] Izmitli A., Ngunjiri J., Lan T., Pacholski M.L., Smith R., Impact of Silicone Additives on Slip/Mar Performance and Surface Characteristics of Waterborne Acrylic Coatings, Progress in Organic Coatings, 131, 145–151, 2019.
[17] Bryant K.A.A., Understanding Coefficient of Friction in Coextruded Films, Polymer Laminations Coating Conference, 18-4, 969-77, 1998.
[18] Soutar A., The Fugitive: Slip, Polymer Laminations Coating Conference, 10-2, 319-28, 1996.
[19] Coelho F., Vieira L., Benavides R., Paula M., Bernardin A.M., Magnago R.F., Synthesis and Evaluation of Amides as Slip Additives in Polypropylene, International Polymer Processing Journal of the Polymer Processing Society, 30, 574-584, 2015.
[20] Antoine K.K., Multilayer Flexible Packaging: Additives to Design and Improve the Performance of Multilayer Flexible Packaging, William Andrew, USA, 2016.
[21] Esche G.V., Kromminga T., Schmidt A., New Highly Efficient Silica Antiblocking Aids for PE and PP Films, Social Plastic Engineering conference, 3, 2837-2842, 1998.
[22] Radosta J.A., Riley W.D., Treated Talc as an Effective Anti-Block for LDPE Blown Film, Journal of Plastic Film and Sheeting, 7, 247-258, 1991.
[23] Wooster J.J., Simmons B.E., Optimizing CoF, Seal Performance, and Optical Properties of Polyolefin Plastomers, Journal of Plastic Film and Sheeting, 12, 50-67, 1996.
[24] Coupland K., Maltb, A., Modification of the Surface Properties of Polyethylene Plastomer Films by the use of Additives, Journal of Plastic Film and Sheeting, 13, 142-149, 1997.
[25] Essche G.V., Kromminga T., Schmidt A., New Highly Efficient Silica Anti-Blockingaids for PE and PP Films, Journal of Plastic Film and Sheeting, 16, 155-168, 2000.
[26] Huang Y., Xiong Y., Liu C., Lia L., Single-crystalline 2D Erucamide with Low Friction and Enhanced Thermal Conductivity, Colloids and Surfaces A, 540, 29–35, 2018.