-
Subject Areas :
1 -
Keywords: -,
Abstract :
-
References:
1.Rezadoust A.M.,Beheshti M.H., Reinforced Plastics (Polymer Composites) (Persian). Iran Polymer and Petrochemical Institute, Tehran, Iran, 3-4,2005.
2.Odegard G.M., Bandyopadhyay A., “Physical Aging of Epoxy Polymers and their Composites” J. Polym. Sci. Part B: Polym. Phys., 49, 1695‐1716, 2011.
3.Martin R., Ageing of Composites, Woodhead Publishing Limited, Cambridge, England, 467-496, 2008.
4.Tian W.D., Hodgkin J., “Long-term Aging in a Commercial Aerospace Composite Sample: Chemical and Physical Changes”J. Appl. Polym. Sci., 115, 2981-2985, 2010.
5.Hutchinson J.M., “Physical Aging of Polymers”Prog. Polym.Sci, 20, 703-760,1995.
6. Brown R.P., Greenwood J.H., Particle Guide to the Assessment of the Useful Life of Plastics, Rapra Technology Limited, Shrewsbury,UK,15-20, 2002.
7. Wright D.C., Environmental Stress Cracking of Plastics, Rapra Technology Limited, Shrewsbury,UK,4-7, 1996.
8. Maxwell A.S., Broughton W.R., Dean G., Sims G.D., Review of Accelerated Ageing Methods and Lifetime Prediction Techniques for Polymeric Materials, National Physical Laboratory (NPL), Teddington,UK, 10-13,2005.
9. Sims G.D., Broughton W.R., Glass Fiber Reinforced Plastics–Properties, National Physical Laboratory, Teddington, UK, 151-197, 2000.
10. BankL.C., GentryT.R., “Accelerated Test Methods to Determine the Long-Term Behavior of FRP Composite Structures: Environmental Effects”J. Reinf. Plast.Comp., 14, 559-587,1995.
11. Amin M., Akbar M., Salman M.,“Composite Insulators and Their Aging: An Overview”Sci. China Ser. E, 50, 697-713, 2007.
12. Kim S.H., Cherney E.A., Hackam R., Rutheford K.G.,“Chemical Changes at the Surface of RTV Silicone Rubber Coatings on Insulators during Dry-Band Arcing”Ieee T. Dielect. El. In., 1, 106-123, 1994.
13. Sarathi R., Chandrasekar S., Giri V.S.,Venkataseshaiah C., Velmurugan R., “Analysis of Surface Degradation of High Density Polyethylene (HDPE) Insulation Material due to Tracking”B. Mater. Sci.,27, 251-262, 2004.
14. Hu H.W., “Physical Aging in Long Term Creep of Polymeric Composite Laminates”J. Mech., 23, 245-252, 2007.
15. Shi X.D., Fernando B.M.D., CrollSG., “Concurrent Physical Aging and Degradation of Crosslinked Coating Systems in Accelerated Weathering”J. Coat. Technol. Res, 5, 299-309, 2008.
16. Leveque D., Schieffer A., Mavel A., Maire J.F.,“Analysis of How Thermal Aging Affects the Long-Term Mechanical Behavior and Strength of Polymer–Matrix Composites”Compos. Sci. Technol.,65, 395-401, 2005.
17. G'sell C., Mckenna G.B., “Influence of Physical Ageing on the Yield Response of Model DGEBA/Poly(propylene oxide) Epoxy Glasses”Polymer, 33, 2103-2113, 1992.
18. Oyanguren P.A., Vallo C.I., Frontini P.M., Williams R.J.J., “Rejuvenation of Epoxy Glasses Subjected to Uniaxial Compression”Polymer, 35, 5279-5282, 1994.
19. Kong E.S.W., “Physical Aging in Epoxy Matrices and Composites”Adv. Polym. Sci., 80, 125-171, 1986.
20. Aboulfaraj M., Gsell C., Mangelinck D., McKenna G.B., “Physical Aging of Epoxy Networks After Quenching and/or Plastic Cycling”J. Non-Cryst.Solids, 172, 615-621, 1994.
21. Chang T.D., Brittain J.O., “Studies of Epoxy Resin Systems: Part C: Effect of Sub-Tg Aging on the Physical Properties of a Fully Cured Epoxy Resin”Polm. Eng. Sci., 22, 1221-1227, 1982.
22.Ophir Z.H., Emerson J.A., Wilkes G.L., “Sub‐Tg Annealing Studies of Rubber‐Modified and Unmodified Epoxy Systems”J. Appl. Physics, 49, 5032-5038, 1978.
23. Kawakami H., Souda K., Nanzai Y., “Relaxation Phenomenon in Epoxy Glass Aged under Post-Yield Strain”Polym. Eng. Sci., 46, 630-634, 2006.
24. Kawakami H., Watanabe M., “Changes in the Thermomechanical Behavior of Epoxy Glasses Under the State of Strain Aging”J. Appl. Polym. Sci.,107, 2095-2100, 2008.
25. FergusonT.P., Qu J., “Elastic Modulus Variation due to Moisture Absorption and Permanent Changes Upon Redrying in an Epoxy Based Underfill”IEEE T. Compon. Pack.T., 29, 105-111, 2006.
26. Barbosa A.P.C., Fulco A.P.P., Guerra E.S.S., Arakaki F.K, Tosatto M., Costa M.C.B., Melo J.D.D., “Accelerated Aging Effects on Carbon Fiber/Epoxy Composites”Compos.Part B-Eng., 110, 298-306, 2017.
27. Sugiman S., Putra I.K.P., Setyawan P.D., “Effects of the Media and Ageing Condition on the Tensile Properties and Fracture Toughness of Epoxy Resin”Polym. Degrad. Stabil.,134, 311-321, 2016.
28. Kwon D.J., Shin P-S., Kim J-H., Baek Y-M., Park H-S, Devries L., Park J-M., “Interfacial Properties and Thermal Aging of Glass Fiber/Epoxy Composites Reinforced with SiC and SiO2 Nanoparticles”Compos. Part B-Eng., 130, 46-53, 2017.
29. Chang L.N., Chow W.S., “Accelerated Weathering on GlassFiber/Epoxy/Organo-MontmorilloniteNanocomposites”J. Compos.Mater, 24, 1421-1434, 2010.
30. Li. Y., Xue B., “Hydrothermal Ageing Mechanisms of Unidirectional Flax Fabric Reinforced Epoxy Composites”Polym. Degrad. Stabil.,126, 144-158, 2016.
1.Rezadoust A.M.,Beheshti M.H., Reinforced Plastics (Polymer Composites) (Persian). Iran Polymer and Petrochemical Institute, Tehran, Iran, 3-4,2005.
2.Odegard G.M., Bandyopadhyay A., “Physical Aging of Epoxy Polymers and their Composites” J. Polym. Sci. Part B: Polym. Phys., 49, 1695‐1716, 2011.
3.Martin R., Ageing of Composites, Woodhead Publishing Limited, Cambridge, England, 467-496, 2008.
4.Tian W.D., Hodgkin J., “Long-term Aging in a Commercial Aerospace Composite Sample: Chemical and Physical Changes”J. Appl. Polym. Sci., 115, 2981-2985, 2010.
5.Hutchinson J.M., “Physical Aging of Polymers”Prog. Polym.Sci, 20, 703-760,1995.
6. Brown R.P., Greenwood J.H., Particle Guide to the Assessment of the Useful Life of Plastics, Rapra Technology Limited, Shrewsbury,UK,15-20, 2002.
7. Wright D.C., Environmental Stress Cracking of Plastics, Rapra Technology Limited, Shrewsbury,UK,4-7, 1996.
8. Maxwell A.S., Broughton W.R., Dean G., Sims G.D., Review of Accelerated Ageing Methods and Lifetime Prediction Techniques for Polymeric Materials, National Physical Laboratory (NPL), Teddington,UK, 10-13,2005.
9. Sims G.D., Broughton W.R., Glass Fiber Reinforced Plastics–Properties, National Physical Laboratory, Teddington, UK, 151-197, 2000.
10. BankL.C., GentryT.R., “Accelerated Test Methods to Determine the Long-Term Behavior of FRP Composite Structures: Environmental Effects”J. Reinf. Plast.Comp., 14, 559-587,1995.
11. Amin M., Akbar M., Salman M.,“Composite Insulators and Their Aging: An Overview”Sci. China Ser. E, 50, 697-713, 2007.
12. Kim S.H., Cherney E.A., Hackam R., Rutheford K.G.,“Chemical Changes at the Surface of RTV Silicone Rubber Coatings on Insulators during Dry-Band Arcing”Ieee T. Dielect. El. In., 1, 106-123, 1994.
13. Sarathi R., Chandrasekar S., Giri V.S.,Venkataseshaiah C., Velmurugan R., “Analysis of Surface Degradation of High Density Polyethylene (HDPE) Insulation Material due to Tracking”B. Mater. Sci.,27, 251-262, 2004.
14. Hu H.W., “Physical Aging in Long Term Creep of Polymeric Composite Laminates”J. Mech., 23, 245-252, 2007.
15. Shi X.D., Fernando B.M.D., CrollSG., “Concurrent Physical Aging and Degradation of Crosslinked Coating Systems in Accelerated Weathering”J. Coat. Technol. Res, 5, 299-309, 2008.
16. Leveque D., Schieffer A., Mavel A., Maire J.F.,“Analysis of How Thermal Aging Affects the Long-Term Mechanical Behavior and Strength of Polymer–Matrix Composites”Compos. Sci. Technol.,65, 395-401, 2005.
17. G'sell C., Mckenna G.B., “Influence of Physical Ageing on the Yield Response of Model DGEBA/Poly(propylene oxide) Epoxy Glasses”Polymer, 33, 2103-2113, 1992.
18. Oyanguren P.A., Vallo C.I., Frontini P.M., Williams R.J.J., “Rejuvenation of Epoxy Glasses Subjected to Uniaxial Compression”Polymer, 35, 5279-5282, 1994.
19. Kong E.S.W., “Physical Aging in Epoxy Matrices and Composites”Adv. Polym. Sci., 80, 125-171, 1986.
20. Aboulfaraj M., Gsell C., Mangelinck D., McKenna G.B., “Physical Aging of Epoxy Networks After Quenching and/or Plastic Cycling”J. Non-Cryst.Solids, 172, 615-621, 1994.
21. Chang T.D., Brittain J.O., “Studies of Epoxy Resin Systems: Part C: Effect of Sub-Tg Aging on the Physical Properties of a Fully Cured Epoxy Resin”Polm. Eng. Sci., 22, 1221-1227, 1982.
22.Ophir Z.H., Emerson J.A., Wilkes G.L., “Sub‐Tg Annealing Studies of Rubber‐Modified and Unmodified Epoxy Systems”J. Appl. Physics, 49, 5032-5038, 1978.
23. Kawakami H., Souda K., Nanzai Y., “Relaxation Phenomenon in Epoxy Glass Aged under Post-Yield Strain”Polym. Eng. Sci., 46, 630-634, 2006.
24. Kawakami H., Watanabe M., “Changes in the Thermomechanical Behavior of Epoxy Glasses Under the State of Strain Aging”J. Appl. Polym. Sci.,107, 2095-2100, 2008.
25. FergusonT.P., Qu J., “Elastic Modulus Variation due to Moisture Absorption and Permanent Changes Upon Redrying in an Epoxy Based Underfill”IEEE T. Compon. Pack.T., 29, 105-111, 2006.
26. Barbosa A.P.C., Fulco A.P.P., Guerra E.S.S., Arakaki F.K, Tosatto M., Costa M.C.B., Melo J.D.D., “Accelerated Aging Effects on Carbon Fiber/Epoxy Composites”Compos.Part B-Eng., 110, 298-306, 2017.
27. Sugiman S., Putra I.K.P., Setyawan P.D., “Effects of the Media and Ageing Condition on the Tensile Properties and Fracture Toughness of Epoxy Resin”Polym. Degrad. Stabil.,134, 311-321, 2016.
28. Kwon D.J., Shin P-S., Kim J-H., Baek Y-M., Park H-S, Devries L., Park J-M., “Interfacial Properties and Thermal Aging of Glass Fiber/Epoxy Composites Reinforced with SiC and SiO2 Nanoparticles”Compos. Part B-Eng., 130, 46-53, 2017.
29. Chang L.N., Chow W.S., “Accelerated Weathering on GlassFiber/Epoxy/Organo-MontmorilloniteNanocomposites”J. Compos.Mater, 24, 1421-1434, 2010.
30. Li. Y., Xue B., “Hydrothermal Ageing Mechanisms of Unidirectional Flax Fabric Reinforced Epoxy Composites”Polym. Degrad. Stabil.,126, 144-158, 2016.