irdpt-140502291914050229195447CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagIran Polymer Technology, Research and Developmentirdpt2538-3345621201721-mohammadrezamoghbeli621201751610.66224/irdpt.27489.2.1.5http://irdpt.ir/fa/Article/27489- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
- http://irdpt.ir/fa/Article/Download/27489
1. Binder K., Monte Carlo and Molecular Dynamics Simulations in Polymer Science, Oxford University press, Oxford, 1995.
2. Zeng Q.H., Yu A.B., Lu G.Q., Multiscale Modeling and Simulation of Polymer Nanocomposites, Prog. Polym. Sci. 33,191‒269, 2008.
3. Alkhateb H., Al-Ostaz A., Cheng A.H-D.,Molecular Dynamics Simulations of Graphite-Vinylester Nanocomposites and Their Constituents,Carbon lett.11, 316‒324, 2010.
4. Nayebi P., Zaminpayma E., A molecular Dynamic Simulation Study of Mechanical Properties of Graphene–Polythiophene Composite with ReaxForce Field, Phys. Lett. A, 380, 628–633, 2016.
5. Pavlov A.S., Khalatur P.G., Fully Atomistic Molecular Dynamics Simulation of Nanosilica-Filled Crosslinked Polybutadiene, Chem. Phys. Lett. 653, 90–95, 2016.
6. Roussou R.E., Karatasos K., Graphene/poly(ethylene glycol) Nanocomposites as Studied by Molecular Dynamics Simulations, Mater. Des. 97, 163–174, 2016.
7. Fu Y., Song J.H., Large Deformation Mechanism of Glassy Polyethylene Polymer
Nanocomposites: Coarse Grain Molecular Dynamics Study, Comput. Mater. Sci. 96, 485–494, 2015.
8. Lin F., Xiang Y., Shen H. S., Temperature Dependent Mechanical Properties of Graphene Reinforced Polymer Nanocomposites – a Molecular Dynamics Simulation, Compos. Part B 111, 261‒269, 2017.
9. Jeyranpour F., Alahyarizadeh Gh., Minuchehr A., The Thermo-Mechanical Properties Estimation of Fullerene-Reinforced Resin Epoxy Composites by Molecular Dynamics Simulation-A Comparative Study, Polymer 88, 9‒18, 2016.
10. Jang C., Nouranian S.,Lacy T E., Gwaltney S. R., Toghiani H., Pittman C. U., Molecular Dynamics Simulations of Oxidized Vapor-Grown Carbon Nanofiber Surface Interactions with Vinyl Ester Resin Monomers, Carbon 50,748 –760, 2012.
11. S. Yang, F. Gao, J. Qu, A Molecular Dynamics Study of Tensile Strength Between a Highly Crosslinked Epoxy Molding Compound and a Copper Substrate, Polymer, 54, 5064‒5074, 2013.
12. Chen Y., Chia J.Y.H., Su Z.C., Tay T.E., Tan V.B.C., Mechanical Characterization of Interfaces in Epoxy-Clay Nanocomposites by Molecular Simulations, Polymer, 54,766‒773, 2013.
13. Lv C., Xue Q., Xue D., Ma M., Xie J., Chen H., Effect of Chemisorption on the Interfacial Bonding Characteristics of Graphene‒Polymer Composites , J. Phys. Chem. C, 114, 6588–6594, 2010.
14. Nikkhah S. J., Moghbeli M. R., Hashemianzadeh S. M., Investigation of the Interface between Polyethylene and Functionalized Graphene: A Computer Simulation Study, Curr. Appl. Phys. 15, 1188‒1199, 2015.
15. Nikkhah S. J., Moghbeli M. R., Hashemianzadeh S. M., Dynamic Study of Deformation and Adhesion of an Amorphous Polyethylene/Graphene Interface: A Simulation Study, Macromol. Theory Simul.25, 533‒549, 2016.
16. Lee H., Venable R.M., MacKerellJr A.D., Pastor R.W., Molecular Dynamics Studies of Polyethylene Oxide and Polyethylene Glycol: Hydrodynamic Radius and Shape Anisotropy, Biophys. J. 95, 1590‒1599, 2008.
17. Han M., Chen P., Yang X., Molecular Dynamics Simulation of PAMAM Dendrimer in Aqueous Solution, Polymer 46, 3481–3488, 2005.
18.GiulioTesei, GaioParadossi, and Ester Chiessi, Poly(vinyl alcohol) Oligomer in Dilute Aqueous Solution: A Comparative Molecular Dynamics Simulation Study, J. Phys. Chem. B 116, 10008−10019, 2012.
18. Golzar K., Amjad-Iranagh S., Amani M., Modarress H., Molecular Simulation Study of Penetrant Gas Transport Properties into the Pure and Nanosized Silica Particles Filled Polysulfone Membranes, J. Membr. Sci. 451, 117‒134, 2014.
20. Shen M., Keten S., Lueptow R.M., Dynamics of Water and Solute Transport in Polymeric Reverse Osmosis Membranes via Molecular Dynamics Simulations, J. Membr. Sci.506, 98‒108, 2016.
21. Machácková M., Tokarsky J., Capková P., A Simple Molecular Modeling Method For the Characterization of PolymericDrug Carriers, Eur. J. Phar. Sci. 48, 316‒322, 2013.
22. Razmimanesh F., Amjad-Iranagh S., Modarress H., Molecular Dynamics Simulation Study of Chitosan and Gemcitabine as a Drug Delivery System, 21,1‒14, 2015.
23. Haile, J. M., Molecular Dynamics Simulation, Elementary Methods, John Wiley & Sons New York, 1992.
24. Allen, M. P., Tildesley, D. J., Computer Simulation of Liquids, Clarendon Press Oxford, Oxford, 1987.
25. Frenkel D., Smit B., Understanding Molecular Simulation:from Algorithms to Applications Academic Press, San Diego, 2002.
-leilanaji6212017172810.66224/irdpt.27490.2.1.17http://irdpt.ir/fa/Article/27490- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
- http://irdpt.ir/fa/Article/Download/27490
1. Unsworth J., Lunn B. A., Innis P. C., Jin Z., Kaynak A., and Booth N. G., Conducting Polymer Electronics, Journal of Intelligent Material Systems and Structures, 3, 380-395, 1992.
2. Hobaica S. C., Stability of Polyaniline in Air and Acidic Water, Journal of Polymer Science Part B: Polymer Physics, 41, 807–822, 2003.
3. Bogdanović U., Vodnik V. V., Ahrenkiel S. P., Stoiljković M., Ćirić-Marjanović G., and Nedeljković J. M., Interfacial Synthesis and Characterization of Gold/Polyaniline Nanocomposites, Synthetic Metals, 195, 122–131, 2014.
4. Huang J. and Kaner R. B., The Intrinsic Nanofibrillar Morphology of Polyaniline, Chemical Communications, 4, 367–376, 2006.
5. Li G., Zhu R., and Yang Y., Polymer Solar Cells, Nature photonics, 6, 153–161, 2012.
6. Chen S. M., Ramachandran R., Mani V., and Saraswathi R., Recent Advancements in Electrode Materials for the High Performance Electrochemical Supercapacitors: A Review, International Journal of Electrochemical Science, 9, 4072-4085, 2014.
7. Cai W., Gong X., and Cao Y., Polymer Solar Cells: Recent Development and Possible Routes for Improvement in the Performance, Solar Energy Materials and Solar Cells, 94, 114–127, 2010.
8. Adebanjo O., Vaagensmith B., and Qiao Q., Double Junction Polymer Solar Cells, Journal of Materials Chemistry A, 2, 10331-10349, 2014.
9. Sai-Anand G., Gopalan A. I., Lee K. P., Venkatesan S., Kang B. H., Lee S. W., and Kang S. W., A Futuristic Strategy to Influence the Solar Cell Performance Using Fixed and Mobile Dopants Incorporated Sulfonated Polyaniline Based Buffer Layer, Solar Energy Materials and Solar Cells, 141, 275-290, 2015.
10. Tan Z. A., Li L., Wang F., Xu Q., Li S., Sun G., and Li Y., Solution‐Processed Rhenium Oxide: A Versatile Anode Buffer Layer for High Performance Polymer Solar Cells with Enhanced Light Harvest, Advanced Energy Materials, 4, 2014.
11. Valaski R., Muchenski F., Mello R. M., Micaroni L., Roman L. S., and Hümmelgen I. A., Sulfonated Polyaniline/Poly (3-Methylthiophene)-Based Photovoltaic Devices, Journal of Solid State Electrochemistry, 10, 24-27, 2006.
12. Han Y. K., Chang M. Y., Ho K. S., Hsieh T. H., Tsai J. L., and Huang, P. C., Electrochemically Deposited Nano Polyaniline Films as Hole Transporting Layers in Organic Solar Cells, Solar Energy Materials and Solar Cells, 128, 198-203, 2014.
13. Chang M. Y., Wu C. S., Chen Y. F., Hsieh B. Z., Huang W. Y., Ho K. S., and Han Y. K., Polymer Solar Cells Incorporating One-Dimensional Polyaniline Nanotubes, Organic Electronics, 9, 1136-1139, 2008.
14. Fan W., Zhang C., Tjiu W. W., Pramoda K. P., He C., and Liu T., Graphene-Wrapped Polyaniline Hollow Spheres as Novel Hybrid Electrode Materials for Supercapacitor Applications, ACS Applied Materials & Interfaces, 5, 3382-3391, 2013.
15. Yoon Y., Lee K., and Lee H., Low-Dimensional Carbon and MXene-Based Electrochemical Capacitor Electrodes, Nanotechnology, 27, 172001, 2016.
16. Eftekhari A., Li L., and Yang Y., Polyaniline Supercapacitors, Journal of Power Sources, 347, 86-107, 2017.
17. Gupta V., and Miura N., Polyaniline/Single-Wall Carbon Nanotube (PANI/SWCNT) Composites for High PerformanceSupercapacitors, Electrochimica Acta, 52, 1721-1726, 2006.
18. Imani A., and Farzi G., Facile Route for Multi-Walled Carbon Nanotube Coating with Polyaniline: Tubular Morphology Nanocomposites for Supercapacitor Applications, Journal of Materials Science: Materials in Electronics, 26, 7438-7444, 2015.
19. Wang Q., Wu Y., Li T., Zhang D., Miao M., and Zhang A., High Performance Two-Ply Carbon Nanocomposite Yarn Supercapacitors Enhanced with a Platinum Filament and in Situ Polymerized Polyaniline Nanowires, Journal of Materials Chemistry A, 4, 3828-3834, 2016.
20. Cheng Q., Tang J., Ma J., Zhang H., Shinya N., & Qin L. C., Polyaniline-Coated Electro-Etched Carbon Fiber Cloth Electrodes For Supercapacitors, The Journal of Physical Chemistry C, 115, 23584-23590, 2011.
21. Ke F., Tang J., Guang S., and Xu H., Controlling the Morphology and Property of Carbon Fiber/Polyaniline Composites for Supercapacitor Electrode Materials by Surface Functionalization, RSC Advances, 6, 14712-14719, 2016.
22. Liu H., Wang Y., Gou X., Qi T., Yang J., and Ding Y., Three-Dimensional Graphene/Polyaniline Composite Material for High-Performance Supercapacitor Applications, Materials Science and Engineering: B, 178, 293-298, 2013.
23. Tong J., Zhang H., Gu J., Li L., Ma C., Zhao J., and Wang C., Poly (Ethylene Glycol)-Block-Poly (Propylene Glycol)-Block-Poly (Ethylene Glycol)-Assisted Synthesis of Graphene/Polyaniline Composites as High-Performance Supercapacitor Electrodes, Journal of Materials Science, 51, 1966-1977, 2016.
24. Zhang J., Shu D., Zhang T., Chen H., Zhao H., Wang Y., and Cao X., Capacitive Properties of PANI/MnO2 Synthesized via Simultaneous-Oxidation Route, Journal of Alloys and Compounds, 532, 1-9, 2012.
25. Wang J. G., Yang Y., Huang Z. H., and Kang F, Interfacial Synthesis of Mesoporous MnO 2/Polyaniline Hollow Spheres and Their Application in Electrochemical Capacitors, Journal of Power Sources, 204, 236-243, 2012.
26. Gottam R., and Srinivasan P., One‐Step Oxidation of Aniline by Peroxotitanium Acid to Polyaniline–Titanium Dioxide: A Highly Stable Electrode for a Supercapacitor, Journal of Applied Polymer Science, 132, 2015.
27. Gobal F., and Faraji M., Electrodeposited Polyaniline on Pd-Loaded TiO 2 Nanotubes as Active Material for Electrochemical Supercapacitor, Journal of Electroanalytical Chemistry, 691, 51-56, 2013.
28. Xie S., Gan M., Ma L., Li Z., Yan J., Yin H., andHu J., Synthesis of Polyaniline-Titania Nanotube Arrays Hybrid Composite via Self-Assembling and Graft Polymerization for Supercapacitor pplication, Electrochimica Acta, 120, 408-415, 2014.
29. Ates M., Serin M. A., Ekmen I., and Ertas Y. N., Supercapacitor Behaviors of Polyaniline/CuO, Polypyrrole/CuO and PEDOT/CuO Nanocomposites, Polymer Bulletin, 72, 2573-2589, 2015.
30. Zhu S., Wu M., Ge M. H., Zhang H., Li S. K., and Li C. H., Design and Construction of Three-Dimensional CuO/Polyaniline/rGO Ternary Hierarchical Architectures for High Performance Supercapacitors, Journal of Power Sources, 306, 593-601, 2016. -seyed hamidsalimi6212017294010.66224/irdpt.27491.2.1.29http://irdpt.ir/fa/Article/27491- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
- http://irdpt.ir/fa/Article/Download/27491
1. Haghiri Y. and Tarantino T., Smart Card Manufacturing: a Practical Guide, John Wiley & Sons, 2002.
2. Rankl W. and Effing W., Smart Card Handbook, Translated by Cox K., 4th ed., John Wiley & Sons, 2010.
3. ISO/IEC 7810, Identification Cards,Physical Characteristics.
4. ISO/IEC 7813, Information Technology, Identification cards , Financial Transaction Cards.
5. ISO/IEC 7816-1, Identification Cards, Integrated Circuit Cards, Part 1: Cards with Contacts -- Physical Characteristics
6- استاندارد ایران – ایزو – آی ای سی 7810، کارت¬های شناسایی – ویژگی¬های فیزیکی
7- استاندارد ملی ایران 8454، فناوری اطلاعات – کارت¬های شناسایی – کارت¬های تراکنش مالی
8- استاندارد ملی ایران 1-8232 ، کارت¬های شناسایی- کارت¬های مدار مجتمع- قسمت 1: کارت¬های دارای کنتاکت¬ها – مشخصات فیزیکی
9. ISO/IEC 10373, Identification Cards, Test methods
10- استاندارد ملی ایران 8453 ، کارت¬های شناسایی – روش¬های آزمون
11. Https://en.Wikipedia.org/wiki/Offset_Printing
12- Http://www.OffsetprintingTechnology.com/sub-categories/Offset-Lithography/
13- Http://www.EmpirePackagingAnddisplays.com/litho-vs-Direct-Print/
14- Https://en.Wikipedia.org/wiki/Screen_Printing -hasansalehi6212017415010.66224/irdpt.27492.2.1.41http://irdpt.ir/fa/Article/27492- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
- http://irdpt.ir/fa/Article/Download/27492
1. M. Mulder, Basic Principles of Membrane Technology. Dordrecht: Springer Netherlands, 1996.
2. B. E. Logan and M. Elimelech, “Membrane-based Processes for Sustainable Power Generation Using Water,” Nature, vol. 488, no. 7411, pp. 313–319, Aug. 2012.
[3] L. D. Tijing, Y. C. Woo, J.S. Choi, S. Lee, S.H. Kim, and H. K. Shon, “Fouling Andits Control in Membrane Distillation Areview,” J. Memb. Sci., vol. 475, pp. 215–244, 2015.
[4] M. A. Shannon, P. W. Bohn, M. Elimelech, J. G. Georgiadis, B. J. Mariñas, and A. M. Mayes, “Science and Technology for Water Purification in the Coming Decades,” Nature, vol. 452, no. 7185, pp. 301–310, Mar. 2008.
[5] Y. Jiang, A. Lee, J. Chen, M. Cadene, B. T. Chait, and R. MacKinnon, “The Open Pore Conformation of Potassium Channels,” Nature, vol. 417, no. 6888, pp. 523–526, May 2002.
[6] D. Menne, F. Pitsch, J. E. Wong, A. Pich, and M. Wessling, “Temperature-Modulated Water Filtration Using Microgel-Functionalized Hollow-Fiber Membranes.,” Angew. Chem. Int. Ed. Engl., vol. 53, no. 22, pp. 5706–10, May 2014.
[7] L.Y. Chu, T. Yamaguchi, and S. Nakao, “A Molecular-Recognition Microcapsule for Environmental Stimuli-Responsive Controlled Release,” Adv. Mater., vol. 14, no. 5, p. 386, Mar. 2002.
[8] T. Meng, “A Thermo-Responsive Affinity Membrane with Nano-structured Pores and Grafted Poly(N-isopropylacrylamide) Surface Layer for Hydrophobic Adsorption,” J. Memb. Sci., vol. 349, no. 1, pp. 258–267, 2010.
[9] B. Yang and W. Yang, “Thermo-Sensitive Switching Membranes Regulated by Pore-Covering Polymer Brushes,” J. Memb. Sci., vol. 218, no. 1, pp. 247–255, 2003.
[10] M. Yang, L.-Y. Chu, H.-D. Wang, R. Xie, H. Song, and C. H. Niu, “A Thermoresponsive Membrane for Chiral Resolution,” Adv. Funct. Mater., vol. 18, no. 4, pp. 652–663, Feb. 2008.
[11] Z. Liu, W. Wang, R. Xie, X. J. Juab and L. Y. Chu, "Stimuli-Responsive Smart Gating Membranes," Chem. Soc. Rev., vol. 45, pp. 460-475, 2016
[12] Z. Liu “Gating Membranes for Water Treatment: Detection and Removal of Trace Pb2+ Ions Based on Molecular Recognition and Polymer Phase Transition,” J. Mater. Chem. A, vol. 1, no. 34, p. 9659, 2013.
[13] J. I. Clodt., “Double Stimuli-Responsive Isoporous Membranes via Post-Modification of pH-Sensitive Self-Assembled Diblock Copolymer Membranes,” Adv. Funct. Mater., vol. 23, no. 6, pp. 731–738, Feb. 2013.
[14] T. Luo., “pH-responsive Poly(ether sulfone) Composite Membranes Blended with Amphiphilic Polystyrene-Block-Poly(Acrylic Acid) Copolymers,” J. Memb. Sci., vol. 450, pp. 162–173, 2014.
[15] J. Xue., “Stimuli-Responsive Multifunctional Membranes of Controllable Morphology from Poly(vinylidene fluoride)- graft -Poly[2-( N,N -dimethylamino)ethyl methacrylate] Prepared via Atom Transfer Radical Polymerization,” Langmuir, vol. 24, no. 24, pp. 14151–14158, Dec. 2008.
[16] F. Luo., “Smart Gating Membranes with in Situ Self-Assembled Responsive Nanogels as Functional Gates,” Sci. Rep., vol. 5, p. 14708, Oct. 2015.
[17] D, Schmaljohann, “Thermo- and pH-Responsive Polymers in Drug Delivery,” Adv. Drug Deliv. Rev., vol. 58, no. 15, pp. 1655–1670, Dec. 2006.
[18] G. Pasparakis, T. Manouras, P. Argitis, and M. Vamvakaki, “Photodegradable Polymers for Biotechnological Applications,” Macromol. Rapid Commun., vol. 33, no. 3, pp. 183–198, Feb. 2012.
[19] C. Weber, R. Hoogenboom, and U. S. Schubert, “Temperature Responsive Bio-compatible Polymers Based on Poly(Ethylene Oxide) and Poly(2-Oxazoline)s,” Prog. Polym. Sci., vol. 37, no. 5, pp. 686–714, May 2012.
[20] R. Xie, Y. Li, and L.Y. Chu, “Preparation of Thermo-Responsive Gating Membranes with Controllable Response Temperature,” J. Memb. Sci., vol. 289, no. 1, pp. 76–85, 2007.
[21] Z. Liu “Positively K + -Responsive Membranes with Functional Gates Driven by Host-Guest Molecular Recognition,” Adv. Funct. Mater., vol. 22, no. 22, pp. 4742–4750, Nov. 2012.
[22] M. Yang, R. Xie, J.Y. Wang, X.J. Ju, L. Yang, and L.Y. Chu, “Gating Characteristics of Thermo-Responsive and Molecular-Recognizable Membranes Based on Poly(N-isopropylacrylamide) and β-cyclodextrin,” J. Memb. Sci., vol. 355, no. 1, pp. 142–150, 2010.
[23] N. Liu, Z. Chen, D. R. Dunphy, Y.-B. Jiang, R. A. Assink, and C. J. Brinker, “Photoresponsive Nanocomposite Formed by Self-Assembly of an Azobenzene-Modified Silane,” Angew. Chemie Int. Ed., vol. 42, no. 15, pp. 1731–1734, Apr. 2003.
[24] L.Y. Chu, Y. Li, J.H. Zhu, H.D. Wang, and Y.J. Liang, “Control of Pore Size and Permeability of a Glucose-Responsive Gating Membrane for Insulin Delivery,” J. Control. Release, vol. 97, no. 1, pp. 43–53, 2004.
[25] A. M. Gajda., “Magnetic Fe3O4 Nanoparticle Heaters in Smart Porous Membrane Valves,” J. Mater. Chem. B, vol. 2, no. 10, p. 1317, 2014.
[26] L.Y. Chu, Y. Li, J.H. Zhu, and W. M. Chen, “Negatively Thermoresponsive Membranes with Functional Gates Driven by Zipper-TypeHydrogen-BondingInteractions,” Angew. Chemie Int. Ed., vol. 44, no. 14, pp. 2124–2127, Mar. 2005.
[27] A. Nayak, H. Liu, and G. Belfort, “An Optically Reversible Switching Membrane Surface,” Angew. Chemie Int. Ed., vol. 45, no. 25, pp. 4094–4098, Jun. 2006.
[28] G. Zhai., “Poly(vinylidene fluoride) with Grafted Zwitterionic Polymer Side Chains for Electrolyte-Responsive Microfiltration Membranes,” Langmuir, vol 19, no 17, pp. 7030–7037, 2003.
[29] Yoshihiro Ito, Shugo Nishi, and Yong Soon Park, and Y. Imanishi, “Oxidoreduction-Sensitive Control of Water Permeation through a Polymer Brushes-Grafted Porous Membrane, ”Macromolecules, vol 30, no 19, pp. 5856–5859, 1997.
-fahimehaskari6212017516010.66224/irdpt.27493.2.1.51http://irdpt.ir/fa/Article/27493- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
- http://irdpt.ir/fa/Article/Download/27493
1. Caldicott R. J., "The Basics of Stretch Blow Molding PET Containers", Plastics Engineering, 55, 35-39, 1999.
2. Awaja F., Pavel D., "Recycling of PET", European Polymer Journal, 41, 1453-1477, 2005.
3. Aharoni S.M., Sharma R.K., Szobota J.S., Vernick D.A., "Crystallinity of Pure and Nucleated PET", Journal of Applied Polymer Science, 28, 2177-2186, 1983.
4. Kumar V., Sonkawade R.G., Chakarvarti S. K., Singh P., Dhaliwal A.S., "Carbon Ion Beam Induced Modifications of Optical, Structural and Chemical Properties in PADC and PET Polymers", Radiation Physics and Chemistry, 81, 652-658, 2012.
5. Van Antwerpen F., Van Krevelen D. W., "Influence of Crystallization Temperature, Molecular Weight, and Additives on the Crystallization Kinetics of Poly (Ethylene Terephthalate)", Journal of Polymer Science ,10, 2423-2435, 1972.
6. Ravindranath K., Mashelkar R. A., "Polyethylene terephthalate chemistry, thermodynamics and transport properties.", Chemical Engineering Science ,41, 2197-2214, 1986.
7. Sinha V., Patel M. R., Patel J. V., "PET Waste Management by Chemical Recycling: a Review", Journal of Polymers and the Environment ,18, 8-25, 2010.
8. Rogers M. E., Long T. E., Turner S. R., "Introduction to Synthetic Methods in Step‐growth Polymers", Wiley-Interscience، New Jersey, 3, 1-16, 2003.
9. Paci M., La Mantia F. P., "Influence of Small Amounts of Polyvinylchloride on the Recycling of Polyethyleneterephthalate", Polymer Degradation and Stability، 63, 11-14, 1999.
10. Scheirs J, "Polymer recycling: Science, Technology and Applications", John Wiley & Sons Ltd, Journals, Baffins Lane, Chichester ,591, 125-134, 1998.
11. Villain F., Coudane J., Vert M., "Thermal Degradation of Polyethylene Terephthalate: Study of Polymer Stabilization", Polymer Degradation and Stability, 49, 393-397, 1995.
12. Gottesman R. T., "Separation of Poly (Vinyl Chloride) from Poly (Ethylene Terephthalate) and Other Plastics Using Automatic Sortation Devices", Makromolekulare Chemie. Macromolecular Symposia, 57, 133-143، 1992.
13. Shukla S. R., Harad, A. M., "Aminolysis of Polyethylene Terephthalate Waste", Polymer Degradation and Stability ,91، 1850-1854, 2006.
14. Pawlak A., Pluta M., Morawiec J., Galeski A., Pracella M., "Characterization of Scrap Poly (Ethylene Terephthalate)", European polymer journal, 36, 1875-1884, 2000.
15. Giannotta G., Po R., Cardi N., Tampellini E., Occhiello E., Garbassi F., Nicolais L., "Processing Effects on Poly (Ethylene terephthalate) from Bottle Scraps.", Polymer Engineering & Science, 34, 1219-1223, 1994.
16. Karayannidis G. P., Chatziavgoustis A. P., Achilias D. S., "Poly (Ethylene terephthalate) Recycling and Recovery of Pure Terephthalic Acid by Alkaline Hydrolysis", Advances in Polymer Technology, 21, 250-259, 2002.
17. Vishvanath S., Narendra A., "Thermodynamic Studies of Depolymerization of Polyethylene Terephthlate (PET) Waste", Journal of Chemical, Biological and Physical Sciences Section A : Chemical Sciences, 4, 1980–1987, 2014.
18. Oku A., Hu L. C., Yamada E., "Alkali Decomposition of Poly (Ethylene terephthalate) with Sodium Hydroxide in Nonaqueous Ethylene Glycol: a Study on Recycling of terephthalic Acid and Ethylene Glycol", Journal of Applied Polymer Science, 63، 595-601, 1997.
19. Oku, A., L‐C. Hu, E. Yamada. "Alkali Decomposition of Poly (Ethylene terephthalate) with Sodium Hydroxide in Nonaqueous Ethylene Glycol: a Study on Recycling of Terephthalic Acid and Ethylene Glycol", Journal of Applied Polymer Science، 63، 595-601, 1997.
20. Polk M. B., Leboeuf L. L., Shah M., Won C. Y., Hu X., Ding W., "Nylon 66, Nylon 46, and PET Phase-transfer-Catalyzed Alkaline Depolymerization at Atmospheric Pressure", Polymer-Plastics Technology and Engineering, 38, 459-470, 1999.
21. Carta D., Cao G., D’Angeli C, "Chemical Recycling of Poly (Ethylene Terephthalate) (PET) by Hydrolysis and Glycolysis", Environmental Science and Pollution Research, 10, 390-394, 2003.
22. Mandoki Jorge W., Depolymerization of Condensation Polymers, US Pat. 4,605, 762, 1986.
23. Blackmon K. P., Fox D. W., Shafer S. J., Process for Converting Pet Scrap to Diamine Monomers, US Pat. 4,973, 746, 1990.
24. Karayannidis G. P., Achilias D. S., "Chemical Recycling of Poly (Ethylene Terephthalate)", Macromolecular Materials and Engineering, 292, 128-146, 2007.
25. Chiu S. J., Cheng W. H., "Thermal Degradation and Catalytic Cracking of Poly (Ethylene terephthalate)", Polymer Degradation and Stability, 63, 407-412, 1999.
26. Chen J. W., Chen L. W., "The Glycolysis of Poly (Ethylene terephthalate)", Journal of applied polymer science, 73, 35-40, 1999.
27. Imran M., Kim B. K., Han M., Cho B. G., "Sub-and Supercritical Glycolysis of Polyethylene Terephthalate (PET) Into the Monomer bis (2-hydroxyethyl) Terephthalate (BHET)", Polymer Degradation and Stability, 95, 1686-1693, 2010.
28. Pingale N. D., Shukla S. R., "Microwave Assisted Ecofriendly Recycling of Poly (Ethylene terephthalate) Bottle Waste", European Polymer Journal, 44 ،4151-4156, 2008.
29. Chaudhary S., Surekha P., Kumar D., Rajagopal C., Roy P. K., "Microwave Assisted Glycolysis of Poly (Ethylene terepthalate) for Preparation of Polyester Polyols", Journal of Applied Polymer Science, 129, 2779-2788, 2013. -hamidmobedi6212017617010.66224/irdpt.27494.2.1.61http://irdpt.ir/fa/Article/27494- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
- http://irdpt.ir/fa/Article/Download/27494
1. Lendlein A., Shastri V.P., “Stimuli-Sensitive Polymers”, Adv. Mater. 22, 3344–3347, 2010.
2. Hatefi A., Amsden B., “Biodegradable Injectable in-situ Forming Drug Delivery Systems”, J. Control. Release 80, 9–28, 2002.
3. Abashzadeh S., Dinarvand R., Sharifzadeh M., Hassanzadeh G., Amini M., Atyabi F., “Formulation and Evaluation of an In-situ Gel Forming System for Controlled Delivery of Triptorelin Acetate”, Eur. J. Pharm. Sci. 4, 514–521, 2011.
4. Gil E., Hudson S., “Stimuli- Reponsive Polymers and Their Bio Conjugates”, Prog. Polym. Sci. 29, 1173–1222, 2004.
5. Renard P., Jordan O., Faes A., Petri-Fink A., Hofmann H., Ru D., Bosman F., “The In-vivo Performance of Magnetic Particle-Loaded Injectable, In-situ Gelling, Carriers for The Delivery of Local Hyperthermia”, Biomaterials 31, 691–705, 2010.
6. Dunn R.L., English J.P., Cowsar D.R., Vanderbilt D.P., “Biodegradable in-Situ Forming Implants and Methods of Producing the Same”, US Patents 4,938,763, 1990.
7. Matschke C., Isele U., Van Hoogevest P., Fahr A., “Sustained- Release Injectable Formed In-situ and Their Potential Use for Veterinary Products”, J. Control. Release 85, 1–15, 2002.
8. DesNoyer J.R., McHugh A.J., “Role of Crystallization in The Phase Inversion Dynamics and Protein Release Kinetics of Injectable Drug Delivery Systems”, J. Control. Release 70, 285–294, 2001.
9. Thakur RR, McMillan HL, Jones DS. “Solvent Induced Phase Inversion-Based In-situ Forming Controlled Release Drug Delivery Implants”, J. Control. Release 176, 8–23, 2014.
10. Jamshidi K., Hyon S.-H., Ikada Y., “Thermal Characterization of Poly Lactides”, Polymer 29, 2229–2234, 1988.
11. Lee J., Jallo G.I., Penno M.B., Gabrielson K.L., Young G.D., Johnson R.M., Rampersaud C., Carson BS., Guarnieri M., “Intracranial Drug-Delivery Scaffolds: Biocompatibility Evaluation of Sucrose Acetate Isobutyrate Gels”, Toxicol. Appl. Pharmacol. 215, 64–70, 2006.
12. Lin X., Yang S., Gou J., Zhao M., Zhang Y., Qi N., He H., Cai C., Tang X., Guo P., “A Novel Risperidone- Loaded SAIB-PLGA Mixture Matrix Depot with a Reduced Burst Release: Effects of Solvents and PLGA on Drug Release Behaviours In-vitro/In-vivo”, J. Mater. Sci. Mater. Med. 23,443–455, 2012.
13. Dunn R.L., English J.P., Cowsar D.R., Vanderbilt D.D., “Biodegradable In-situ Forming Implants and Methods of Producing the Same”, US Patent 5,278,202, 2004.
14. Brodbeck K.J., Gaynor-Duarte A.T., Shen T., “Gel Composition and Methods”, US Patent 6,130,200, 2000.
15. Chern R.T., Zingerman J.R., “Liquid Polymeric Compositions for Controlled Release of Bio Active Substances”, US Patent 10/753,724, 2004.
16. Schoenhammer K., Petersen H., Guethlein F., Goepferich A., “Poly (Ethylene Glycol)500 Dimethyl Ether as Novel Solvent for Injectable In-situ Forming Depots”, Pharm.Res. 26, 2568–2577, 2009.
17. Raman C., McHugh A.J., “A Model for Drug Release from Fast Phase Inverting Injectable Solutions”, J. Control. Release 102, 145–157, 2005.
18. Fredenberg S., Wahlgren M., Reslow M., Axelsson A., “The Mechanisms of Drug Release in Poly (Lactic-co-Glycolic Acid)- Based Drug Delivery Systems- A Review”, Int. J. Pharm. 415, 34–55, 2011.
19. Zare M., Mobedi H., Barzin J., Mivehchi H., Jamshidi A., Mashayekhi R., “Effect of Additives on Release Profile of Leuprolide Acetate in An In-situ Forming Controlled- Release System: In-vitro Study”, J. App. Polym. Sci. 107, 3781–3787, 2008.
20. Omelczuk M.O., McGinity J.W., “The Influence of Polymer Glass Transition Temperature and Molecular Weight on Drug Release from Tablets Containing Poly (DL-Lactic Acid")”, Pharm. Res. 9, 26–32, 1992.
21. Göpferich A., “Polymer Degradation and Erosion: Mechanisms and Applications”, Eur. J. Pharm. Biopharm. 42, 1–11, 1996.
22. Miyajima M., Koshika A., Okada J., Ikeda M., Nishimura K., “Effect of Polymer Crystallinity on Papaverine Release from Poly (L-Lactic Acid) Matrix”, J. Control. Release 49, 207–215, 1997.
23. Juvekar S., Kathpalia H., “Solvent Removal Precipitation Based In-situ Forming Implant for Controlled Drug Delivery in Periodontitis”, J. Control. Release. 2017.
24. Rahimi M., Mobedi H., Behnamghader A., In-situ Forming Poly (Lactic Acid-co-Glycolic Acid) Implants containing Leuprolide Acetate/β-cyclodextrin Complexes: Preparation, Characterization, and In-vitro Drug Release, Int. J. Polym. Mater. Polym. Biomater. 65(2), 75-84, 2015.
25. Dong W.Y., Körber M., López V. Esguerra, Bodmeier R., “Stability of Poly (D, L Lactide-co-Glycolide) and Leuprolide Acetate in In-situ Forming Drug Delivery Systems”, J. Control. Release 115, 158–167, 2006.
26. Astaneh R., Erfan M., Barzin J., Mobedi H., “Effects of Ethyl Benzoate on Performance, Morphology, and Erosion of PLGA Implants Formed In-situ”, Adv. Polym. Technol. 2717–26, 2008.
27. Lee S.S., Hughes P., Ross A.D., Robinson M.R., “Biodegradable Implants for Sustained Drug Release in The Eye”, Pharm. Res. 27, 2043–2053, 2010.
28. Kempe S., Mäder K., “In-situ Forming Implants- An Attractive Formulation Principle for Parenteral Depot Formulations” , J. Control. Release 161, 668–679, 2012. -abbassheikh6212017718010.66224/irdpt.27495.2.1.71http://irdpt.ir/fa/Article/27495- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
- http://irdpt.ir/fa/Article/Download/27495
1 . Hatakeyama E. S., “Design and Development of New Polymer Memberanes for Water Filtration Applications”, Ph.D. thesis, University of California, San Diego, University of Colorado at Boulder, 2010.
2. Guillen G. R. , Pan Y., Li M. and V Hoek E. M., “Preparation and characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review,” Ind. Eng. Chem. Res., vol. 50, no. 7, pp. 3798–3817, 2011.
3. Mannan H. A., Mukhtar H., Murugesan T., Nasir R., Mohshim D. F. and Mushtaq A., “Recent Applications of Polymer Blends in Gas Separation Membranes,” Chem. Eng. Technol., 36, 1838–1846, 2013.
4. Wang D. M., and Lai J. Y., “Recent Advances in Preparation and Morphology Control of Polymeric Membranes Formed by Nonsolvent Induced Phase Separation”, Curr. Opin. Chem. Eng., 2, 229–237, 2013.
5. Lalia B. S., Kochkodan V., Hashaikeh R. and Hilal N., “A Review on Membrane Fabrication: Structure, Properties and Performance Relationship”, Desalination, 326, 77–95, 2013.
6. سلجوقي ا., غفاريان و., اخوت ا., فناوري ساخت،اصلاح و ارزيابي غشاهاي پليمري, سازمان انتشارات جهاد دانشگاهي. یکم, تهران, 1392.
7. Saljoughi E., Sadrzadeh M., and Mohammadi T., “Effect of Preparation Variables on Morphology and Pure Water Permeation Flux Through Asymmetric Cellulose Acetate Membranes”, J. Memb. Sci., 326, 627–634, 2009.
8. Anna Lee C., a Jeffrey W. Elamb and Seth B. Darlinga, “Membrane Materials for Water Purification: Design, Development, and Application,” Environmental Science: Water Research & Technology, 17–42, 2015.
9. Li D., Yan Y., and Wang H., “Recent Advances in Polymer and Polymer Composite Membranes for Reverse and Forward Osmosis Processes”, Progress in Polymer Science, vol. 61. pp. 104–155, 2016.
10. Voicu V. K. T. S. I., “Recent Advances in Cellulose and Chitosan Based Membranes for Water Purification A Concise Review” Carbohydr Polym.,146, 148–165, 2016.
11. Fischer S., Thummler K., Volkert B., Hettrich K., Fischer K. and Schmidt I., “Properties and Applications of Cellulose Acetate.” Macromolecular Symposia, 89–96, 2008.
12. Bao C., “Cellulose Acetate / Plasticizer Systems : Structure, Morphology and Dynamics”.
Polymers. Universite Claude Bernard - Lyon I, 2015.
13. Romero R. B., Leite C. A. P. and Gonçalves M. do C., “The Effect of the Solvent on the Morphology of Cellulose Acetate/Montmorillonite Nanocomposites”, Polymer (Guildf)., 50, 161–170, 2009.
14. Khan S. B., Alamry K. A., Bifari E. N., Asiri A. M., Yasir M. Gzara L. Ahmad R. Z., “Assessment of Antibacterial Cellulose Nanocomposites for Water Permeability and Salt Rejection,” J. Ind. Eng. Chem., 24, 266–275, 2015.
15. Jalali A., Shockravi A., Vatanpour V. and Hajibeygi M., “Preparation and Characterization of Novel Microporous Ultrafiltration PES Membranes Using Synthesized Hydrophilic Polysulfide-amide Copolymer as an Additive in the Casting Solution”, Microporous and Mesoporous Materials, 228,1–13, 2016.
16. Matsuyama H., Yamamoto A., Yano H., Maki T., Teramoto M., Mishima K., Matsuyama K., “ Effect of Organic Solvents on Membrane Formation by Phase Separation with Supercritical CO2,” J. Memb. Sci., 204, 81–87, 2002.
17. Choi H., Yoon S. H., Son M., Celik E., Park H.and Choi H., “Efficacy of Synthesis Conditions on Functionalized Carbon Nanotube Blended Cellulose Acetate Membrane for Desalination”, Desalin. Water Treat., 57, 7545–7554, 2016.
18. Wang C. F., An Y., Li Q. H., Wan S. J., Chen W. X. and Liu X. D., “Nonsolvent Effects on Morphology of Cellulose Acetate Films Prepared by Dry-Cast Process”, J. Macromol. Sci. Part B, vol. 51, no. 11, pp. 2266–2275, 2012.
19. Mulder M., Basic Principles of Membrane Technology, Netherlands, Kluwer,1996.
20. Saljoughi E. and T. Mohammadi, “Cellulose Acetate (CA)/Polyvinylpyrrolidone (PVP) Blend Asymmetric Membranes: Preparation, Morphology and Performance”, Desalination, 249, 850–854, 2009.
21. Saljoughi E., Amirilargani M. and Mohammadi T., “Effect of Poly(vinyl pyrrolidone) Concentration and Coagulation Bath Temperature on the Morphology, Permeability, and Thermal Stability of Asymmetric Cellulose Acetate Membranes”, J. Appl. Polym. Sci., 111, 2537–2544, 2009.
22. Ng L. Y., Mohammad A. W., Leo C. P. and Hilal N., “Polymeric Membranes Incorporated with Metal/metal Oxide Nanoparticles: A Comprehensive Review”, Desalination, 308, 15–33, 2013.
23. Liang S., Xiao K., Mo Y. and Huang X., “A Novel ZnO Nanoparticle Blended Polyvinylidene Fluoride Membrane for Anti-irreversible Fouling”, Journal of Membrane Science, 394–395, 184–192, 2012.
24. Kim J. and Van Der Bruggen B., “The Use of Nanoparticles in Polymeric and Ceramic Membrane Structures: Review of Manufacturing Procedures and Performance Improvement for Water Treatment”, Environmental Pollution, 158, 2335–2349, 2010.
25. جعفرزاده ی., صداقت م., يگاني ر., آثار نانوذراتTiO2 و ZnO بر ساختار و رفتار گرفتگي غشاهاي پلي اتيلني، علوم و تکنولوژي پليمر، 477-49،, 1394.
26. Abedini R., Mousavi S. M. and Aminzadeh R., “A Novel Cellulose Acetate (CA) Membrane Using TiO2 Nanoparticles: Preparation, Characterization and Permeation Study”, Desalination, 277, 40–45, 2011.
27. Gul S,e., Waheed S., Ahmad A., Khan. S. M., Jamil T., Islam A., Hussain T., “Synthesis, Characterization and Permeation Performance of Cellulose Acetate/polyethylene Glycol-600 Membranes Loaded with Silver Particles for Ultra Low Pressure Reverse Osmosis”, Journal of the Taiwan Institute of Chemical Engineers, 57 129–138, 2014.
28. Baghbanzadeh M.,Rana D., Lan C. Q. and Matsuura T., “Effects of Inorganic Nano-Additives on Properties and Performance of Polymeric Membranes in Water Treatment”, Separation & Purification Reviews, vol. 45, no. 2. pp. 141–167, 2015.
29. Vidya S., Vijayalakshmi A., Nagendran A. and Mohan D., “Effect of Additive Concentration on Cellulose Acetate Blend Membranes- Preparation , Characterization and Application Studies”, Sep. Sci. Technol., 43, 1933–1954, 2008.
30. Saljoughi E., Amirilargani M. and Mohammadi T., “Effect of PEG Additive and Coagulation Bath Temperature on the Morphology, Permeability and Thermal/chemical Stability of Asymmetric CA Membranes”, Desalination, 262, 72–78, 2010.
31. Waheed S., Ahmad A., Maqsood S., Gul S.- and Jamil T., “Synthesis , characterization , permeation and antibacterial properties of cellulose acetate / polyethylene glycol membranes modi fi ed with chitosan”, DES, vol. 351, pp. 59–69, 2014.
32. Taylor P., Nagendran A., Arockiasamy D. L. and Mohan D., “Materials and Manufacturing Processes Cellulose Acetate and Polyetherimide Blend Ultrafiltration Membranes , I : Preparation , Characterization , and Application Cellulose Acetate and Polyetherimide Blend Ultrafiltration Membranes” , I : Preparation , 37–41, 2013.
33. Nagendran A. and Mohan D. R., “Cellulose Acetate and Polyetherimide Blend Ultrafiltration Membranes : II . Effect of additive”.,Polymers for Advanced Technologies, 9, 24–35, 2008.
34. Han B., Zhang D., Shao Z., Kong L. and Lv S., “Preparation and Characterization of Cellulose Acetate / carboxymethyl Cellulose Acetate Blend Ultra Filtration Membranes”, DES, 311, 80–89, 2013.
35. Malaisamy R., Mahendran R., Mohan D.,Rajendran M., and Mohan V., “Cellulose Acetate and Sulfonated Polysulfone Blend Ultrafiltration Membranes . I . Preparation and Characterization, 2002.
36. Krishnamoorthy L. and Mohammed P., “Separation of Proteins from Aqueous Solution Using Cellulose Acetate / poly ( Vinyl chloride ) Blend Ultrafiltration Membrane”, 2914–2921, 2011.
37. Sajitha C. J., Mahendran R., and Mohan D., “Studies on Cellulose Acetate – carboxylated Polysulfone Blend Ultrafiltration Membranes –– Part I”, 38, 2507–2511, 2002.