irdpt-202605191920260519194109CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagIran Polymer Technology, Research and Developmentirdpt2538-33454212026104BitaAbediMiladGhaniMarziyehKavian4212026132610.66224/irdpt.52011.10.4.13http://irdpt.ir/en/Article/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011http://irdpt.ir/en/Article/Download/52011[1] Gosecka M., Gosecki M., Jaworska‐Krych D., Hydrophobized hydrogels: construction strategies, properties, and biomedical applications, Advanced Functional Materials, 33(25), 2212302, 2023. [2] Mahmood A., Patel D., Hickson B., DesRochers J., Hu X., Recent progress in biopolymer-based hydrogel materials for biomedical applications International Journal of Molecular Sciences, 23(3), 1415, 2022. [3] Siwal S. S., Mishra K., Saini A. K., Alsanie W. F., Kovalcik A., Thakur V. K., Additive manufacturing of bio-based hydrogel composites: recent advances, Journal of Polymers and the Environment, 30(11), 4501-4516, 2022. [4] Ali A., Ahmed S., Recent advances in edible polymer based hydrogels as a sustainable alternative to conventional polymers, Journal of agricultural and food chemistry, 66(27), 6940-6967, 2018. [5] Gupta N., Mahur B. K., Izrayeel A. M. D., Ahuja A., Rastogi V. K., Biomass conversion of agricultural waste residues for different applications: a comprehensive review, Environmental Science and Pollution Research, 29(49), 73622-73647, 2022. [6] Rizwan M., Yahya R., Hassan A., Yar M., Azzahari A. D., Selvanathan V., Abouloula C. N., pH sensitive hydrogels in drug delivery: Brief history, properties, swelling, and release mechanism, material selection and applications, Polymers, 9(4), 137, 2017. [7] Bustamante-Torres M., Romero-Fierro D., Arcentales-Vera B., Palomino K., Magaña H., Bucio E., Hydrogels classification according to the physical or chemical interactions and as stimuli-sensitive materials, Gels, 7(4), 182, 2021. [8] Wang W., Zhang Y., Liu W., Bioinspired fabrication of high strength hydrogels from non-covalent interactions, Progress in Polymer Science, 71, 1-25, 2017. [9] Gyles D. A., Castro L. D., Silva Jr J. O. C., Ribeiro-Costa R. M., A review of the designs and prominent biomedical advances of natural and synthetic hydrogel formulations, European Polymer Journal, 88, 373-392, 2017. [10] Yannas I. V., Tzeranis D. S., Harley B. A., So P. T. C., Biologically active collagen-based scaffolds: advances in processing and characterization, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 368(1917), 2123-2139, 2010. [11] Su J., Li J., Liang J., Zhang K., Li J., Hydrogel preparation methods and biomaterials for wound dressing, Life, 11(10), 1016, 2021. [12] Liu Y., Wang J., Chen H., Cheng D., Environmentally friendly hydrogel: A review of classification, preparation and application in agriculture, Science of the Total Environment, 846, 157303, 2022. [13] Demeter M., Călina I., Scărișoreanu A., Micutz M., E-beam cross-linking of complex hydrogels formulation: The influence of poly (Ethylene Oxide) concentration on the hydrogel properties, Gels, 8(1), 27, 2021. [14] Tang Y., Heaysman C. L., Willis S., Lewis A. L., Physical hydrogels with self-assembled nanostructures as drug delivery systems, Expert opinion on drug delivery, 8(9), 1141-1159, 2011. [15] Sim B., Chang J. J., Lin Q., Wong J. H. M., Ow V., Leow Y., Loh X. J., Hydrogels based on polyelectrolyte complexes: underlying principles and biomedical applications, Biomacromolecules, 25(12), 7563-7580, 2024. [16] Hoque M., Alam M., Wang S., Zaman J. U., Rahman M. S., Johir M. A. H., Yoon M. H., Interaction chemistry of functional groups for natural biopolymer-based hydrogel design, Materials Science and Engineering: R: Reports, 156, 100758, 2023. [17] Selvaraj S., Chauhan A., Dutta V., Verma R., Rao S. K., Radhakrishnan A., Ghotekar S., A state-of-the-art review on plant-derived cellulose-based green hydrogels and their multifunctional role in advanced biomedical applications, International Journal of Biological Macromolecules, 265, 130991, 2024. [18] Huang X., Li J., Luo J., Gao Q., Mao A., Li J., Research progress on double-network hydrogels, Materials Today Communications, 29, 102757, 2021. [19] Malik U. S., Niazi M. B. K., Jahan Z., Zafar M. I., Vo D. V. N., Sher, F., Nano-structured dynamic Schiff base cues as robust self-healing polymers for biomedical and tissue engineering applications: a review, Environmental Chemistry Letters, 20(1), 495-517, 2022. [20] Sringam J., Pankongadisak P., Trongsatitkul T., Suppakarn N., Improving mechanical properties of starch-based hydrogels using double network strategy, Polymers, 14(17), 3552., 2022. [21] Ellis R. P., Cochrane M. P., Dale M. F. B., Duffus C. M., Lynn A., Morrison I. M., Tiller S. A., Starch production and industrial use, Journal of the Science of Food and Agriculture, 77(3), 289-311, 1998. [22] Necas J., Bartosikova L., Carrageenan: a review, Veterinarni medicina, 58(4), 187-205, 2013. [23] Horga R., Di Renzo F., Quignard F., Ionotropic alginate aerogels as precursors of dispersed oxide phases, Applied Catalysis A: General, 325(2), 251-255, 2007. [24] Pujana M. A., Pérez-Álvarez L., Iturbe L. C. C., Katime I., Biodegradable chitosan nanogels crosslinked with genipin, Carbohydrate Polymers, 94(2), 836-842, 2013. [25] Wang X., Zhou Z., Guo X., He Q., Hao C., Ge C., Ultrasonic-assisted synthesis of sodium lignosulfonate-grafted poly (acrylic acid-co-poly (vinyl pyrrolidone)) hydrogel for drug delivery, RSC advances, 6(42), 35550-35558, 2016. [26] Wang H., Jiang L., Wu H., Zheng W., Kan D., Cheng R., Sun S. K., Biocompatible iodine–starch–alginate hydrogel for tumor photothermal therapy, ACS Biomaterials Science & Engineering, 5(7), 3654-3662, 2019. [27] Calvert P., Hydrogels for soft machines, Advanced materials, 21(7), 743-756, 2009. [28] Bonifacio M. A., Cometa S., Cochis A., Scalzone A., Gentile P., Scalia A. C., De Giglio E., A bioprintable gellan gum/lignin hydrogel: a smart and sustainable route for cartilage regeneration, International Journal of Biological Macromolecules, 216, 336-346, 2022. [29] Wang W., Zhang Y., Liu W., Bioinspired fabrication of high strength hydrogels from non-covalent interactions, Progress in Polymer Science, 71, 1-25, 2017. [30] Lu Y., Wang Z., Ouyang X. K., Ji C., Liu Y., Huang F., Yang L. Y., Fabrication of cross-linked chitosan beads grafted by polyethylenimine for efficient adsorption of diclofenac sodium from water, International journal of biological macromolecules, 145, 1180-1188, 2020. BaharVaseghi MaghvanSaraTarashi4212026152510.66224/irdpt.52067.10.4.15http://irdpt.ir/en/Article/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067http://irdpt.ir/en/Article/Download/52067[1] Rezvani Ghomi E., Niazi M., and Ramakrishna S., The evolution of wound dressings: From traditional to smart dressings, Polymers for Advanced Technologies, 34, 2, 520-530, 2023. [2] Koosha M., Modern Commercial Wound Dressings and Introducing New Wound Dressings for Wound Healing: A Review, Basparesh, 6, 4, 65-80, 2017. [3] Rezvani Ghomi E., Khalili S., Nouri Khorasani S., Esmaeely Neisiany R., and Ramakrishna S., Wound dressings: Current advances and future directions, Journal of Applied Polymer Science, 136, 27, 47738, 2019. [4] Sheokand B., Vats M., Kumar A., Srivastava C. M., Bahadur I., and Pathak S. R., Natural polymers used in the dressing materials for wound healing: Past, present and future, Journal of Polymer Science, 61, 14, 1389-1414, 2023. [5] Sadeghi M., Rahimnejad M., Adeli H., and Feizi F., Wound healing: An overview of wound dressings on health care, Current Pharmaceutical Biotechnology, 23, 2022. [6] Stechmiller J. K., Understanding the role of nutrition and wound healing, Nutrition in Clinical Practice (NCP), 25, 1941-2452, 2010. [7] Farazin A., Torkpour Z., Dehghani S., Mohammadi R., Fahmy M., Saber-Samandari S., Labib K., and Khandan A., A review of polymeric wound dress for the treatment of burns and diabetic wounds, International Journal of Basic Science in Medicine, 6, 44-50, 2021. [8] Xiao X., Xiao X., Nashalian A., Libanori A., Fang Y., Li X., and Chen J., Triboelectric nanogenerators for self-powered wound healing, Advanced Healthcare Materials, 10, 20, 2100975, 2021. [9] Zhu G., Peng B., Jing Q., and Wang Z., Triboelectric nanogenerators as a new energy technology: From fundamentals, devices, to applications, Nano Energy, 14, 126-138, 2015. [10] Wang S., Lin L., and Wang Z. L., Triboelectric nanogenerators as self-powered active sensors, Nano Energy, 11, 436-462, 2015. [11] Wang Z. L., Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors, ACS Nano, 7, 11, 9533-9557, 2013. [12] Zhang R., and Olin H., Material choices for triboelectric nanogenerators: A critical review, EcoMat, 2, 4, e12062, 2020. [13] Cheng T., Shao J., and Wang Z., Triboelectric nanogenerators, Nature Reviews Methods Primers, 3, 2023. [14] Savencu I., Sonia I., Porfire A., Bogdan C., and Tomuta I., Review of advances in polymeric wound dressing films, Reactive and Functional Polymers, 168, 105059, 2021. [15] Madaghiele M., Demitri C., Sannino A., and Ambrosio L., Polymeric hydrogels for burn wound care: Advanced skin wound dressings and regenerative templates, Burns & Trauma, 2, 4, 2014. [16] Pan Z., Ye H., and Wu D., Recent advances on polymeric hydrogels as wound dressings, APL Bioengineering, 5, 011504, 2021. [17] Yum H.-Y., Han S. A., Konstantinov K., Kim S.-W., and Kim J. H., Smart triboelectric nanogenerators toward human-oriented technologies: Health monitoring, wound healing, drug delivery, Advanced Materials Technologies, 8, 10, 2201500, 2023. [18] Kao F. C., Ho H. H., Chiu P. Y., Hsieh M. K., Liao J. C., Lai P. X., Huang Y. F., Dong M. Y., Tsai T. T., and Lin Z., Self-assisted wound healing using piezoelectric and triboelectric nanogenerators, Science and Technology of Advanced Materials, 23, 1468-6996, 2022. [19] Wang W., Sun W., Du Y., Zhao W., Liu L., Sun Y., Kong D., Xiang H., Wang X., Li Z., and Ma Q., Triboelectric nanogenerators-based therapeutic electrical stimulation on skin: From fundamentals to advanced applications, ACS Nano, 17, 9793–9825, 2023. [20] Jeong S.-H., Lee Y., Lee M.-G., Song W., Park J. U., and Sun J.-Y., Accelerated wound healing with an ionic patch assisted by a triboelectric nanogenerator, Nano Energy, 79, 105463, 2021. [21] Lv X., Guo C., Luo S., Qi L., Shi J., Zhao J., Chen Y., He A., and Fan Q., Self-adhesive ultrasound-mediated triboelectric nanogenerator device for subcutaneous antibacterial treatment and accelerated wound healing, Science China Materials, 68, 2024. [22] Zhang Y., Zhou Z., Sun L., Liu Z., Xia X., and Tao T., Genetically engineered biofunctional triboelectric nanogenerators using recombinant spider silk, Advanced Materials, 30, 1521-4095 2018. [23] Sharma A., Panwar V., Mondal B., Prasher D., Bera M. K., Thomas J., Kumar A., Kamboj N., Mandal D., and Ghosh D., Electrical stimulation induced by a piezo-driven triboelectric nanogenerator and electroactive hydrogel composite accelerate wound repair, Nano Energy, 99, 107419, 2022.ZahraSalimi BoroujeniSeyedeh BentolhodaHosseinianMiladGhani4212026273810.66224/irdpt.52105.10.4.27http://irdpt.ir/en/Article/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105http://irdpt.ir/en/Article/Download/52105[1] Qin H, Liu H, Liu Y, Di S, Bao Y, Zhai Y, Zhu S. Recent advances in sample preparation and chromatographic analysis of pharmaceuticals and personal care products in environment. TrAC Trends in Analytical Chemistry, 164, 117112 ,2023. [2] Wen Y, Sun D, Li J, Ostovan A, Wang X, Ma J, You J, Muhammad T, Chen L, Arabi M. The metal-and covalent-organic frameworks-based molecularly imprinted polymer composites for sample pretreatment. TrAC Trends in Analytical Chemistry, 178, 117830 ,2024. [3] Boontongto T, Santaladchaiyakit Y, Burakham R. Biomass waste-derived magnetic material coated with dual-dummy-template molecularly imprinted polymer for simultaneous extraction of organophosphorus and carbamate pesticides. Food Chemistry, 441, 138325 ,2024. [4] Sun D, Song Z, Zhang Y, Wang Y, Lv M, Liu H, Wang L, Lu W, Li J, Chen L. Recent advances in molecular-imprinting-based solid-phase extraction of antibiotics residues coupled with chromatographic analysis. Frontiers in Environmental Chemistry, 2, 703961 ,2021. [5] Li S, Ma J, Ji X, Ostovan A, Li J, Yu J, Wang X, Sun X, Chen L. Nitrogen-doped metal-organic framework derived porous carbon/polymer membrane for the simultaneous extraction of four benzotriazole ultraviolet stabilizers in environmental water. Journal of Chromatography A, 1695, 463929 ,2023. [6] Cheng J, Ma J, Li S, Wang Q, Lv M, Li J, Wang X, Wang H, Chen L. The covalent organic framework based nylon membrane extraction coupled with UHPLC-MS/MS for highly efficiency determination of hexabromocyclododecanes in environmental water. Journal of Hazardous Materials, 451, 131191 ,2023. [7] Elattar RH, El-Deen AK. Porous material-based QuEchERS: Exploring new horizons in sample preparation. TrAC Trends in Analytical Chemistry, 172, 117571 ,2024. [8] Chen D, Zhao X, Jing X, Zhao R, Zhu G, Wang C. Bio-inspired functionalization of electrospun nanofibers with anti-biofouling property for efficient uranium extraction from seawater. Chemical Engineering Journal, 465, 142844 ,2023. [9] Zhang N, Zhang N, Xu Y, Li Z, Yan C, Mei K, Ding M, Ding S, Guan P, Qian L, others. Molecularly imprinted materials for selective biological recognition. Macromolecular rapid communications, 40, 1900096 ,2019. [10] Mahon CS, Fulton DA. Mimicking nature with synthetic macromolecules capable of recognition. Nature chemistry, 6, 665–72 ,2014. [11] Huang Y, Li Y, Wu Y, Huang X. Computer-aided design-based green fabrication of magnetic molecularly imprinted nanoparticles for specific extraction of non-steroidal anti-inflammatory drugs. Chemical Engineering Journal, 452, 139440 ,2023. [12] Gu Z, Guo Z, Gao S, Huang L, Liu Z. Hierarchically structured molecularly imprinted nanotransducers for truncated HER2-targeted photodynamic therapy of therapeutic antibody-resistant breast cancer. ACS nano, 17, 10152–63 ,2023. [13] Zangiabadi M, Bahrami F, Ghosh A, Yu H, Agrahari AK, Chen X, Zhao Y. Synthetic Catalysts for Selective Glycan Cleavage from Glycoproteins and Cells. Journal of the American Chemical Society, 146, 4346–50 ,2024. [14] Arabi M, Ghaedi M, Ostovan A. Development of a lower toxic approach based on green synthesis of water-compatible molecularly imprinted nanoparticles for the extraction of hydrochlorothiazide from human urine. ACS Sustainable Chemistry \& Engineering, 5, 3775–85 ,2017. [15] Li P, Liu Z. Glycan-specific molecularly imprinted polymers towards cancer diagnostics: merits, applications, and future perspectives. Chemical Society Reviews, 53, 1870–91 ,2024. [16] Wang JL, Zhang CY, Li X, Wang XD, Cao M, Asami T, Xiong XH, Chen JS, Lu YC. “UV-driven self-cleaning” magnetic molecularly imprinted absorbents coupled with LTP-MS and LC-TQ-MS for rapid high-throughput screening and quantification of organophosphorus pesticides in agro-products. Journal of Agricultural and Food Chemistry, 71, 7891–903 ,2023. [17] Peng Y, Sanati S, Morsali A, Garc\’\ia H. Metal--organic frameworks as electrocatalysts. Angewandte Chemie International Edition, 62, e202214707 ,2023. [18] Lahcen AA, Surya SG, Beduk T, Vijjapu MT, Lamaoui A, Durmus C, Timur S, Shekhah O, Mani V, Amine A, others. Metal--organic frameworks meet molecularly imprinted polymers: insights and prospects for sensor applications. ACS Applied Materials \& Interfaces, 14, 49399–424 ,2022. [19] Wang L, Yu J, Wang X, Li J, Chen L. Molecular imprinting-based nanocomposite adsorbents for typical pollutants removal. Journal of Hazardous Materials Letters, 4, 100073 ,2023. [20] Lee G, Yoo DK, Ahmed I, Lee HJ, Jhung SH. Metal-organic frameworks composed of nitro groups: Preparation and applications in adsorption and catalysis. Chemical Engineering Journal, 451, 138538 ,2023. [21] Lai H, Li G, Zhang Z. Advanced materials on sample preparation for safety analysis of aquatic products. Journal of Separation Science, 44, 1174–94 ,2021. [22] Wu X, Chen X, Zhong G, Chen C, Cai C. A novel Wulff-type boronate acid-functionalized magnetic metal-organic framework imprinted polymer for specific recognition of glycoproteins under physiological pH. Journal of Separation Science, 43, 3785–92 ,2020. [23] Zhang Y, Zhao Y-G, Muhammad N, Ye M-L, Zhu Y. Ultrasound-assisted synthesis of clover-shaped nano-titania functionalized covalent organic frameworks for the dispersive solid phase extraction of N-nitrosamines in drinking water. Journal of Chromatography A, 1618, 460891 ,2020. [24] Zhao Q, Zhang H, Zhao H, Liu J, Liu J, Chen Z, Li B, Liao X, Regenstein J Mac, Wang J, others. Strategy of fusion covalent organic frameworks and molecularly imprinted polymers: a surprising effect in recognition and loading of cyanidin-3-O-glucoside. ACS Applied Materials \& Interfaces, 12, 8751–60 ,2020. [25] Xiao Y, Zhang Z, Yin S, Ma X. Nanoplasmonic biosensors for precision medicine. Frontiers in Chemistry, 11, 1209744 ,2023. [26] Firoozichahak A, Rahmani A, Mehregan F, Rahimpoor R. Sensitive and selective magnetic dispersive microextraction of diazinon from urine samples by molecularly imprinted polymer based on core--shell metal--organic frameworks. Journal of Chromatography B, 1207, 123364 ,2022. [27] Han Y, Yang W, Luo X, He X, Zhao H, Tang W, Yue T, Li Z. Carbon dots based ratiometric fluorescent sensing platform for food safety. Critical Reviews in Food Science and Nutrition, 62, 244–60 ,2022. [28] Hatamluyi B, Sadeghian R, Malek F, Boroushaki MT. Improved solid phase extraction for selective and efficient quantification of sunset yellow in different food samples using a novel molecularly imprinted polymer reinforced by Fe3O4@ UiO-66-NH2. Food Chemistry, 357, 129782 ,2021. [29] Zhao Q, Zhang H, Zhao H, Zhu H, Liu J, Li B, Li M, Yang X. Construction of a biomimetic receptor based on hydrophilic multifunctional monomer covalent organic framework molecularly imprinted polymers for molecular recognition of cyanidin-3-O-glucoside. Journal of Agricultural and Food Chemistry, 71, 18024–36 ,2023. [30] Huang Y, Wang R. Highly selective separation of H 2 S and CO 2 using a H 2 S-imprinted polymers loaded on a polyoxometalate@ Zr-based metal--organic framework with a core--shell structure at ambient temperature. Journal of Materials Chemistry A, 7, 12105–14 ,2019. PegahGushehLidaAzimiTahouraMohammadzadeh Novin4212026394810.66224/irdpt.52570.10.4.39http://irdpt.ir/en/Article/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570http://irdpt.ir/en/Article/Download/52570[1] Grzybek, Paweł, et al. “Cellulose-Based Films and Membranes: A Comprehensive Review on Preparation and Applications.” Chemical Engineering Journal, vol. 495, Sept. 2024, p. 153500. DOI.org (Crossref), https://doi.org/10.1016/j.cej.2024.153500. [2] Liu, Yaowen, et al. “A Review of Cellulose and Its Derivatives in Biopolymer-Based for Food Packaging Application.” Trends in Food Science & Technology, vol. 112, June 2021, pp. 532–46. DOI.org (Crossref), https://doi.org/10.1016/j.tifs.2021.04.016. [3] Li, Qingfeng, et al. “Recent Progress in Preparation and Characterization of PBI Membranes for PEMFC.” ECS Meeting Abstracts, vols. MA2006-02, no. 8, June 2006, pp. 412–412. DOI.org (Crossref), https://doi.org/10.1149/MA2006-02/8/412. [4] Abu-Zurayk, Rund, et al. “Cellulose Acetate Membranes: Fouling Types and Antifouling Strategies—A Brief Review.” Processes, vol. 11, no. 2, Feb. 2023, p. 489. DOI.org (Crossref), https://doi.org/10.3390/pr11020489. [5] Nguyen, Hien, et al. “Suppression of Crystallization in Thin Films of Cellulose Diacetate and Its Effect on CO2/CH4 Separation Properties.” Journal of Membrane Science, vol. 586, Sept. 2019, pp. 7–14. DOI.org (Crossref), https://doi.org/10.1016/j.memsci.2019.05.039. [6] Raza, Ayesha, et al. “Novel Cellulose Triacetate (CTA)/Cellulose Diacetate (CDA) Blend Membranes Enhanced by Amine Functionalized ZIF-8 for CO2 Separation.” Polymers, vol. 13, no. 17, Aug. 2021, p. 2946. DOI.org (Crossref), https://doi.org/10.3390/polym13172946. [7] Kobayashi, Shuzo, and Takayasu Ohtake. “The Characteristics of Dialysis Membranes: Benefits of the AN69 Membrane in Hemodialysis Patients.” Journal of Clinical Medicine, vol. 12, no. 3, Jan. 2023, p. 1123. DOI.org (Crossref), https://doi.org/10.3390/jcm12031123. [8] Padhan, Bandana, et al. “Cutting-Edge Applications of Cellulose-Based Membranes in Drug and Organic Contaminant Removal: Recent Advances and Innovations.” Polymers, vol. 16, no. 20, Oct. 2024, p. 2938. DOI.org (Crossref), https://doi.org/10.3390/polym16202938. [9] Khoshnevisan, Kamyar, et al. “Cellulose Acetate Electrospun Nanofibers for Drug Delivery Systems: Applications and Recent Advances.” Carbohydrate Polymers, vol. 198, Oct. 2018, pp. 131–41. DOI.org (Crossref), https://doi.org/10.1016/j.carbpol.2018.06.072. [10] Mphateng, Thabang N., et al. “Melt Processing of Cellulose Acetate for Controlled Release Applications – A Review.” Macromolecular Materials and Engineering, vol. 310, no. 9, Sept. 2025, p. e00117. DOI.org (Crossref), https://doi.org/10.1002/mame.202500117. [11] Wang, Jianming, et al. “Study on the Preparation of Cellulose Acetate Separation Membrane and New Adjusting Method of Pore Size.” Membranes, vol. 12, no. 1, Dec. 2021, p. 9. DOI.org (Crossref), https://doi.org/10.3390/membranes12010009. [12] Zhang, Qingling, et al. “Construction and Properties of Cellulose Diacetate Film Derived from Waste Cigarette Filters.” Cellulose, vol. 27, no. 15, Oct. 2020, pp. 8899–907. DOI.org (Crossref), https://doi.org/10.1007/s10570-020-03393-2. [13] Tonglairoum, P., et al. “Effect of Polyethylene Glycol on Cellulose Acetate Films Designed for Controlled Porosity Osmotic Pump Systems.” Indian Journal of Pharmaceutical Sciences, vol. 81, no. 1, 2019. DOI.org (Crossref), https://doi.org/10.4172/pharmaceutical-sciences.1000486. [14] Chakrabarty, B., et al. “Effect of Molecular Weight of PEG on Membrane Morphology and Transport Properties.” Journal of Membrane Science, vol. 309, nos. 1–2, Feb. 2008, pp. 209–21. DOI.org (Crossref), https://doi.org/10.1016/j.memsci.2007.10.027. [15] Bashir, Zunara, et al. “A Review on Recent Advances of Cellulose Acetate Membranes for Gas Separation.” RSC Advances, vol. 14, no. 27, 2024, pp. 19560–80. DOI.org (Crossref), https://doi.org/10.1039/D4RA01315H. [16] Islam, Md. Didarul, et al. “Cellulose Acetate-Based Membrane for Wastewater Treatment—A State-of-the-Art Review.” Materials Advances, vol. 4, no. 18, 2023, pp. 4054–102. DOI.org (Crossref), https://doi.org/10.1039/D3MA00255A. [17] Kim, Ill Yong, et al. “Effects of Polyethylene Glycol on Morphology of Bioactive CaO-SiO2 Gel.” Key Engineering Materials, vols. 330–332, Feb. 2007, pp. 177–80. DOI.org (Crossref), https://doi.org/10.4028/www.scientific.net/KEM.330-332.177. [18] Mazzotta, Michael G., et al. “Rapid Degradation of Cellulose Diacetate by Marine Microbes.” Environmental Science & Technology Letters, vol. 9, no. 1, Jan. 2022, pp. 37–41. DOI.org (Crossref), https://doi.org/10.1021/acs.estlett.1c00843. MahmoudHeydari4212026495810.66224/irdpt.52980.10.4.49http://irdpt.ir/en/Article/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/52980http://irdpt.ir/en/Article/Download/529801. A Brief History of the Development of Fluororubber, https://www.heatexchangerjiema.com/blog/a-brief-history-of-the-development-of-fluororubber-173816.html. January 2024.2. Drobny J. G., Fluorocarbon Elastomers, in Technology of Fluoropolymers. 2023, CRC Press. p. 133-186.3. Korzeniowski S. H., Buck R. C., Newkold R. M., kassmi A. E., Laganis E., Matsuoka Y., Dinelli B., Beauchet S., Adamsky F., and Weilandt K., A Critical Review of the Application of Polymer of Low Concern Regulatory Criteria to Fluoropolymers Ii: Fluoroplastics and Fluoroelastomers. Integrated Environmental Assessment and Management, 19, 326-354, 2023.4. Henry B. J., Carlin J. P., Hammerschmidt J. A., Buck R. C., Buxton L. W., Fiedler H., Seed J., and Hernandez O., A Critical Review of the Application of Polymer of Low Concern and Regulatory Criteria to Fluoropolymers. Integrated Environmental Assessment and Management, 14, 316-334, 2018.5. Chen Y., Wu Y., Li J., Peng X., Wang S., Wang J., and Jin H. J. C. P. C. O. A., Fluororubber Composites: Preparation Methods, Vulcanization Mechanisms, and the Associated Properties Composites:Part C Open Access, 14, 100461, 1-18, 2024.6. Ameduri B., Boutevin B., and Kostov G. J. P. i. P. S., Fluoroelastomers: Synthesis, Properties and Applications, Progress in Polymer Science, 26, 105-187, 2001.7. Xu Z., Zhang Y., Li A., Wang J., Wang G., and He Q., Research Progress on Compounding Agent and Mechanical Test Method of Fluororubber. Journal of Applied Polymer Science, 138, 50913, 1-28, 2021.8. Duan J., Yang C., Kang H., Li L., Yang F., Fang Q., Han W., and Li D., Structure, Preparation and Properties of Liquid Fluoroelastomers with Different End Groups. RSC advances, 12, 3108-3118, 2022.9. Https://Www.Tribonet.Org/Wiki/Fluorocarbon-Elastomers/.10. Verschuere A. and Cole E., Ffkm to Overcome New Challenges: An Introduction to Perfluoroelastomers. Rubber Fibres Plastics Intl, 10, 122-129, 2015.11. Jagels S., Tecnoflon® a Guide to Fluoroelastomer, http://20.210.105.67/research/wp-content/uploads/2008/11/fkm_guide_rev113004.pdf12. Upasani T., Formulating Fkm with Varying Levels of Metal Oxides , Rubber and Plastics News, 15-17, 2021.13. Wang C. and Su Z., Vulcanization Behavior and Thermal Performance of Peroxide‐Curable Fluoroelastomer. Journal of Applied Polymer Science, 139, 1-11, 2022.14. Heat- and Fluid-Resistant Fluoroelastomer, www:chempoint.com.15. Zhang H., Zhao L., Zhang C., Xu Y., Jia W. J. P. E., Study on the Interaction between Fluoroelastomer and Silica: Characterizations, Polymer Engineering and Science, 63, 4249-4261, 2023.16. Shen P., Bao Y., Zhang Y., Wu Y., Li J., Wang S., Zhu Y., Gao J., and Jin H. J. J. o. T. C. M., Preparation of Kh550-Grafted-Nanosilica Microspheres to Improve the Mechanical, Thermal and Wear Resistance Properties of Fluoroelastomer, Journal of Thermoplastic Composite Materials, 37, 3652-3668, 2024.17. Song R., Yang R., Wang C., and Su Z. J. P. S., Series A, Filling Effects of Baso4 and Caf2 on Non-Linear Rheological Behaviours and Mechanical Performances in Fluoroelastomer, Polymer Science, Series A, 66, 714-729, 2024.18. Heidarian J., Hajjar Z., Rashidzadeh M., Mohajeri A., Salehi Barmi M. M., Karimi Dona M. H. J. P., Rubber, and Composites, Fluoroelastomer/Graphene Nanoplatelets Nanocomposite O-Rings Resistant to Sour Condensate for Centrifugal Pumps, Plastics, Rubber and Composites: Macromolecular Engineering, 1-17, 2025.19. Kumar P., Penta S., Mahapatra S. P. J. J. o. E., and Plastics, Effects of Graphene Oxide Concentration and Frequency on Morphology, Mechanical and Rheological Studies of Fluoroelastomer Nanocomposites, Journal of Elastomers & Plastics, 55, 787-802, 2023.20. Maldonado-Magnere S., Yazdani-Pedram M., Fuentealba P., Neira-Carrillo A., Lopez-Manchado M. A., Hernandez-Villar H., Bascuñan-Heredia A., Dahrouch M., and Aguilar-Bolados H. J. P., Understanding the Effect of Graphene Nanoplatelet Size on the Mechanical and Thermal Properties of Fluoroelastomer-Based Composites, Polymers, 17, 1-18, 2025.21. Mensah B., Martey N.-A., Antwi B. Y., Essien E. J. P., Complementary Effect of Graphene Oxide-Carbon Nanotubes in Fluoro-Elastomer Matrix, Polymers and Polymer Composites 34, 1-17, 2026.22. Chen Y., Wu Y., Li J., Peng X., Wang S., Wang J., and Jin H. J. C. P. C. O. A., Enhancing the Mechanical Properties of Fluororubber through the Formation of Crosslinked Networks with Aminated Multi-Walled Carbon Nanotubes and Reduced Graphene Oxides, Composites Part C: Open Acess, 7, 100245, 2022.23. Periyasamy M., Mubasshir A., Kodra S., Chandramouli S., Campbell R., Kazmer D. O., and Mead J. L. J. M., From Formulation to Application: Effects of Plasticizer on the Printability of Fluoro Elastomer Compounds and Additive Manufacturing of Specialized Seals, Micromachines,15, 622, 2024.24. Compounding Guide 3m™ Dyneon™ Fluoroelastomers. 25. Khanra S., Ganguly D., Ghorai S. K., Goswami D., and Chattopadhyay S. J. J. o. P. R., The Synergistic Effect of Fluorosilicone and Silica Towards the Compatibilization of Silicone Rubber and Fluoroelastomer Based High Performance Blend ,Journal of Polymer Research, 27, 2020. 26. Khanra S., Kumar A., Ganguly D., Ghorai S. K., Chattopadhyay S. J. P. E., Effect of Fkm‐G‐Acrylamide Reactive Compatibilizer on Mechanical, Thermal and Aging Behaviors of Fluoroelastomer (Fkm)/Silicone Rubber (Mvq) Blend, Polymer Engineering and Science, 62, 1239-1255, 2022. 27. Khanra S., Kumar A., Ganguly D., Ghorai S. K., and Chattopadhyay S. J. J. o. P. R., The Efficacy of Methyl Vinyl Silicone-G-Maleic Anhydride in the Compatibilization of Fluoroelastomer and Silicone Based Super Specialty Elastomer Blend, Journal of Polymer Research, 29, 1-18, 2022.28. Li F., Lu J., Wang H., Hu Y., and Xia R. J. J. o. P. R., Study on the Preparation of Macromolecular Compatibilizer and Its Effect on the Characteristics of Fluoroelastomer (Fkm)/Silicone Rubber (Mvq) Blend, Journal of Polymer Research, 31, 1-10, 2024.29. Liu G., Du F., Yao Z., Li G., Kuang W., Zhu C., Liu Y., Chen H., Wang F., and Zhou C., Effects of Ethylene Propylene Diene Monomer (Epdm)-Based Polar Macromolecular Compatibilizers on the Low-Temperature Properties of Fluoroelastomer/Epdm Rubber Blends. Molecules, 29, 5522, 2024.Azizeh Rahmani Del BakhshayeshFariba Alizadeh EghtedarMahdiyeh Rahmani Del Bakhshayesh4212026597210.66224/irdpt.53210.10.4.59http://irdpt.ir/en/Article/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/53210http://irdpt.ir/en/Article/Download/532101. Del Bakhshayesh AR, Babaie S, Niknafs B, Abedelahi A, Mehdipour A, Ghahremani-Nasab M. High efficiency biomimetic electrospun fibers for use in regenerative medicine and drug delivery: A review. Materials Chemistry and Physics. 2022;279:125785.2. Rahmani Del Bakhshayesh A, Saghebasl S, Asadi N, Kashani E, Mehdipour A, Nezami Asl A, et al. Recent advances in nano‐scaffolds for tissue engineering applications: toward natural therapeutics. Wiley Interdisciplinary Reviews: Nanomedicine and Nanobiotechnology. 2023;15(6):e1882.3. Adel IM, ElMeligy MF, Elkasabgy NA. Conventional and recent trends of scaffolds fabrication: a superior mode for tissue engineering. Pharmaceutics. 2022;14(2):306.4. Rahmani Del Bakhshayesh A, Annabi N, Khalilov R, Akbarzadeh A, Samiei M, Alizadeh E, et al. Recent advances on biomedical applications of scaffolds in wound healing and dermal tissue engineering. Artificial cells, nanomedicine, and biotechnology. 2018;46(4):691-705.5. Del Bakhshayesh AR, Asadi N, Alihemmati A, Tayefi Nasrabadi H, Montaseri A, Davaran S, et al. An overview of advanced biocompatible and biomimetic materials for creation of replacement structures in the musculoskeletal systems: focusing on cartilage tissue engineering. Journal of biological engineering. 2019;13(1):85.6. Rahmani Del Bakhshayesh A, Mostafavi E, Alizadeh E, Asadi N, Akbarzadeh A, Davaran S. Fabrication of three-dimensional scaffolds based on nano-biomimetic collagen hybrid constructs for skin tissue engineering. ACS omega. 2018;3(8):8605-11.7. Saghati S, Akbarzadeh A, Del Bakhshayesh A, Sheervalilou R, Mostafavi E. Electrospinning and 3D printing: prospects for market opportunity. 2018.8. Kalogeropoulou M, Díaz-Payno PJ, Mirzaali MJ, van Osch GJ, Fratila-Apachitei LE, Zadpoor AA. 4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications. Biofabrication. 2024;16(2):022002.9. Gueche YA, Sanchez-Ballester NM, Cailleaux S, Bataille B, Soulairol I. Selective laser sintering (SLS), a new chapter in the production of solid oral forms (SOFs) by 3D printing. Pharmaceutics. 2021;13(8):1212.10. Panda BK, Sahoo S. Thermo-mechanical modeling and validation of stress field during laser powder bed fusion of AlSi10Mg built part. Results in Physics. 2019;12:1372-81.11. An J, Leong KF. Multi-material and multi-dimensional 3D printing for biomedical materials and devices. Biomedical Materials & Devices. 2023;1(1):38-48.12. Kong B, Zhao Y. 3D bioprinting for biomedical applications. BME frontiers. 2023;4:0010.13. Vanaei S, Parizi M, Salemizadehparizi F, Vanaei H. An overview on materials and techniques in 3D bioprinting toward biomedical application. Engineered Regeneration. 2021;2:1-18.14. Tyagi N, Bhardwaj V, Sharma D, Tomar R, Chaudhary V, Khanuja M, et al. 3D printing technology in the pharmaceutical and biomedical applications: a critical review. Biomedical Materials & Devices. 2024;2(1):178-90.15. Dong Y, Wang S, Ke Y, Ding L, Zeng X, Magdassi S, et al. 4D printed hydrogels: fabrication, materials, and applications. Advanced Materials Technologies. 2020;5(6):2000034.16. Del Bakhshayesh AR, Ghahremani-nasab M, Babaie S, Del Bakhshayesh MR. Revolutionizing Wound Healing: Integrating 4D Bioprinting with Adaptive Bioactive Coatings for Dynamic Tissue Regeneration. 2025.17. Li Y, Zhang F, Liu Y, Leng J. 4D printed shape memory polymers and their structures for biomedical applications. Science China Technological Sciences. 2020;63(4):545-60.18. Abolhassani S, Fattahi R, Safshekan F, Saremi J, Hasanzadeh E. Advances in 4D bioprinting: The next frontier in regenerative medicine and tissue engineering applications. Advanced Healthcare Materials. 2025;14(4):2403065.19. Zeenat L, Zolfagharian A, Sriya Y, Sasikumar S, Bodaghi M, Pati F. 4D printing for vascular tissue engineering: progress and challenges. Advanced Materials Technologies. 2023;8(23):2300200.20. Cui C, Kim D-O, Pack MY, Han B, Han L, Sun Y, et al. 4D printing of self-folding and cell-encapsulating 3D microstructures as scaffolds for tissue-engineering applications. Biofabrication. 2020;12(4):045018.21. Kuang X, Roach DJ, Wu J, Hamel CM, Ding Z, Wang T, et al. Advances in 4D printing: materials and applications. Advanced Functional Materials. 2019;29(2):1805290.22. Sossou G, Demoly F, Belkebir H, Qi HJ, Gomes S, Montavon G. Design for 4D printing: Modeling and computation of smart materials distributions. Materials & Design. 2019;181:108074.23. Pugliese R, Regondi S. Artificial intelligence-empowered 3D and 4D printing technologies toward smarter biomedical materials and approaches. Polymers. 2022;14(14):2794.24. Cosola A, Roppolo I, Frascella F, Napione L, Barrera G, Tiberto P, et al. 4D Printing of multifunctional devices induced by synergistic role of magnetite and silver nanoparticles in polymeric nanocomposites. Advanced Functional Materials. 2024;34(41):2406226.25. Zhao W, Yan Y, Chen X, Wang T. Combining printing and nanoparticle assembly: Methodology and application of nanoparticle patterning. The Innovation. 2022;3(4).26. Guo J, Zhang R, Zhang L, Cao X. 4D printing of robust hydrogels consisted of agarose nanofibers and polyacrylamide. ACS Macro Letters. 2018;7(4):442-6.27. Tiwari M, Mishra D. Applications of 3D-and 4D-Printed Polymer Nanocomposites in the Medical and Biomedical Field. Polymer Nanocomposites for 3D, 4D and 5D Printing: Fundamental to Applications: Springer; 2025. p. 293-320.28. Quan H, Pirosa A, Yang W, Ritchie RO, Meyers MA. Hydration-induced reversible deformation of the pine cone. Acta biomaterialia. 2021;128:370-83.29. Taghipour YD, Hokmabad VR, Del Bakhshayesh AR, Asadi N, Salehi R, Nasrabadi HT. The application of hydrogels based on natural polymers for tissue engineering. Current medicinal chemistry. 2020;27(16):2658-80.30. Díaz‐Payno PJ, Kalogeropoulou M, Muntz I, Kingma E, Kops N, D'Este M, et al. Swelling‐dependent shape‐based transformation of a human mesenchymal stromal cells‐laden 4D bioprinted construct for cartilage tissue engineering. Advanced healthcare materials. 2023;12(2):2201891.31. Lv C, Sun X-C, Xia H, Yu Y-H, Wang G, Cao X-W, et al. Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing. Sensors and Actuators B: Chemical. 2018;259:736-44.32. Yang GH, Kim W, Kim J, Kim G. A skeleton muscle model using GelMA-based cell-aligned bioink processed with an electric-field assisted 3D/4D bioprinting. Theranostics. 2021;11(1):48.33. Kim SH, Seo YB, Yeon YK, Lee YJ, Park HS, Sultan MT, et al. 4D-bioprinted silk hydrogels for tissue engineering. Biomaterials. 2020;260:120281.34. Kirillova A, Maxson R, Stoychev G, Gomillion CT, Ionov L. 4D biofabrication using shape‐morphing hydrogels. Advanced Materials. 2017;29(46):1703443.35. Constante G, Apsite I, Alkhamis H, Dulle M, Schwarzer M, Caspari A, et al. 4D biofabrication using a combination of 3D printing and melt-electrowriting of shape-morphing polymers. ACS Applied Materials & Interfaces. 2021;13(11):12767-76.36. Liang Z, Liu Y, Zhang F, Ai Y, Liang Q. Dehydration-triggered shape morphing based on asymmetric bubble hydrogel microfibers. Soft Matter. 2018;14(32):6623-6.37. Cao J, Zhou C, Su G, Zhang X, Zhou T, Zhou Z, et al. Arbitrarily 3D configurable hygroscopic robots with a covalent–noncovalent interpenetrating network and self‐healing ability. Advanced Materials. 2019;31(18):1900042.38. Mulakkal MC, Trask RS, Ting VP, Seddon AM. Responsive cellulose-hydrogel composite ink for 4D printing. Materials & Design. 2018;160:108-18.39. Ji Z, Yan C, Yu B, Zhang X, Cai M, Jia X, et al. 3D printing of hydrogel architectures with complex and controllable shape deformation. Advanced Materials Technologies. 2019;4(4):1800713.40. Sydney Gladman A, Matsumoto EA, Nuzzo RG, Mahadevan L, Lewis JA. Biomimetic 4D printing. Nature materials. 2016;15(4):413-8.41. Apsite I, Uribe JM, Posada AF, Rosenfeldt S, Salehi S, Ionov L. 4D biofabrication of skeletal muscle microtissues. Biofabrication. 2020;12(1):015016.42. Ding A, Lee SJ, Ayyagari S, Tang R, Huynh CT, Alsberg E. 4D biofabrication via instantly generated graded hydrogel scaffolds. Bioactive materials. 2022;7:324-32.43. Naficy S, Gately R, Gorkin III R, Xin H, Spinks GM. 4D printing of reversible shape morphing hydrogel structures. Macromolecular Materials and Engineering. 2017;302(1):1600212.44. Taylor MJ, Tomlins P, Sahota TS. Thermoresponsive gels. Gels. 2017;3(1):4.45. Solis DM, Czekanski A. The effect of the printing temperature on 4D DLP printed pNIPAM hydrogels. Soft Matter. 2022;18(17):3422-9.46. Chen G, Zhou Y, Dai J, Yan S, Miao W, Ren L. Calcium alginate/PNIPAAm hydrogel with body temperature response and great biocompatibility: Application as burn wound dressing. International Journal of Biological Macromolecules. 2022;216:686-97.47. Ansari MJ, Rajendran RR, Mohanto S, Agarwal U, Panda K, Dhotre K, et al. Poly (N-isopropylacrylamide)-based hydrogels for biomedical applications: A review of the state-of-the-art. Gels. 2022;8(7):454.48. Ding X, Wang M, Wei L, Wang L, Yuan M, Yu F, et al. Mechanical properties of three N-isopropylacrylamide-based semi-interpenetrating network bilayer hydrogels and their effects on multi-stimuli responsiveness. Iranian Polymer Journal. 2024;33(3):273-87.49. Yue C, Zhai H, Zhang H, Wang T, Li Z, Ma L, et al. Synthesis of a PNIPAM-based composite hydrogel and its multipurpose applications in piezoresistive and temperature sensing. ACS Applied Electronic Materials. 2024;6(5):3216-26.50. Gheysoori P, Paydayesh A, Jafari M, Peidayesh H. Thermoresponsive nanocomposite hydrogels based on Gelatin/poly (N–isopropylacrylamide)(PNIPAM) for controlled drug delivery. European Polymer Journal. 2023;186:111846.51. Huang Y-C, Cheng Q-P, Jeng U-S, Hsu S-h. A biomimetic bilayer hydrogel actuator based on thermoresponsive gelatin methacryloyl–poly (N-isopropylacrylamide) hydrogel with three-dimensional printability. ACS Applied Materials & Interfaces. 2023;15(4):5798-810.52. Bakarich SE, Gorkin R, Spinks GM. 4D Printing with Mechanically Robust, Thermally Actuating Hydrogels. Macromolecular rapid communications. 2015;36(12).53. Halperin A, Kröger M, Winnik FM. Poly (N‐isopropylacrylamide) phase diagrams: fifty years of research. Angewandte Chemie International Edition. 2015;54(51):15342-67.54. Nasef SM, Khozemy EE, Mahmoud GA. pH-responsive chitosan/acrylamide/gold/nanocomposite supported with silver nanoparticles for controlled release of anticancer drug. Scientific Reports. 2023;13(1):7818.55. Pourmadadi M, Darvishan S, Abdouss M, Yazdian F, Rahdar A, Díez-Pascual AM. pH-responsive polyacrylic acid (PAA)-carboxymethyl cellulose (CMC) hydrogel incorporating halloysite nanotubes (HNT) for controlled curcumin delivery. Industrial Crops and Products. 2023;197:116654.56. Rizwan M, Yahya R, Hassan A, Yar M, Azzahari AD, Selvanathan V, et al. pH sensitive hydrogels in drug delivery: Brief history, properties, swelling, and release mechanism, material selection and applications. Polymers. 2017;9(4):137.57. Hu Y, Wang Z, Jin D, Zhang C, Sun R, Li Z, et al. Botanical‐inspired 4D printing of hydrogel at the microscale. Advanced Functional Materials. 2020;30(4):1907377.58. Dai W, Guo H, Gao B, Ruan M, Xu L, Wu J, et al. Double network shape memory hydrogels activated by near-infrared with high mechanical toughness, nontoxicity, and 3D printability. Chemical Engineering Journal. 2019;356:934-49.59. Huang J, Zhao L, Wang T, Sun W, Tong Z. NIR-triggered rapid shape memory PAM–GO–gelatin hydrogels with high mechanical strength. ACS applied materials & interfaces. 2016;8(19):12384-92.60. Regato-Herbella M, Mantione D, Blachman A, Gallastegui A, Calabrese GC, Moya SE, et al. Multiresponsive 4d printable hydrogels with anti-inflammatory properties. ACS Macro Letters. 2024;13(9):1119-26.61. Morrison RJ, Hollister SJ, Niedner MF, Mahani MG, Park AH, Mehta DK, et al. Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients. Science translational medicine. 2015;7(285):285ra64-ra64.62. Liu B, Li H, Meng F, Xu Z, Hao L, Yao Y, et al. 4D printed hydrogel scaffold with swelling-stiffening properties and programmable deformation for minimally invasive implantation. Nature Communications. 2024;15(1):1587.63. Mirani B, Pagan E, Currie B, Siddiqui MA, Hosseinzadeh R, Mostafalu P, et al. An advanced multifunctional hydrogel‐based dressing for wound monitoring and drug delivery. Advanced healthcare materials. 2017;6(19):1700718.64. Kuribayashi-Shigetomi K, Onoe H, Takeuchi S. Cell origami: self-folding of three-dimensional cell-laden microstructures driven by cell traction force. PloS one. 2012;7(12):e51085.65. Saska S, Pilatti L, Blay A, Shibli JA. Bioresorbable polymers: advanced materials and 4D printing for tissue engineering. Polymers. 2021;13(4):563.66. Norotte C, Marga FS, Niklason LE, Forgacs G. Scaffold-free vascular tissue engineering using bioprinting. Biomaterials. 2009;30(30):5910-7.67. Song KH, Highley CB, Rouff A, Burdick JA. Complex 3D‐printed microchannels within cell‐degradable hydrogels. Advanced Functional Materials. 2018;28(31):1801331.68. Ding A, Lee SJ, Tang R, Gasvoda KL, He F, Alsberg E. 4D cell‐condensate bioprinting. Small. 2022;18(36):2202196.69. Kitana W, Apsite I, Hazur J, Boccaccini AR, Ionov L. 4D biofabrication of T‐shaped vascular bifurcation. Advanced Materials Technologies. 2023;8(1):2200429.70. Hwangbo H, Lee H, Roh EJ, Kim W, Joshi HP, Kwon SY, et al. Bone tissue engineering via application of a collagen/hydroxyapatite 4D-printed biomimetic scaffold for spinal fusion. Applied Physics Reviews. 2021;8(2):021403.71. Lin C, Liu L, Liu Y, Leng J. 4D printing of bioinspired absorbable left atrial appendage occluders: a proof-of-concept study. ACS Applied Materials & Interfaces. 2021;13(11):12668-78.72. Zarek M, Mansour N, Shapira S, Cohn D. 4D printing of shape memory‐based personalized endoluminal medical devices. Macromolecular rapid communications. 2017;38(2):1600628.73. Sahafnejad-Mohammadi I, Karamimoghadam M, Zolfagharian A, Akrami M, Bodaghi M. 4D printing technology in medical engineering: a narrative review. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022;44(6):233.74. Shin SR, Farzad MR, Tamayol A, Manoharan MV, Mostafalu P, Zhang YS, et al. A bioactive carbon nanotube-based ink for printing 2D and 3D flexible electronics. Advanced materials (Deerfield Beach, Fla). 2016;28(17):3280.75. Grinberg D, Siddique S, Le MQ, Liang R, Capsal JF, Cottinet PJ. 4D Printing based piezoelectric composite for medical applications. Journal of Polymer Science Part B: Polymer Physics. 2019;57(2):109-15.76. Mahmoud DB, Schulz‐Siegmund M. Utilizing 4D printing to design smart gastroretentive, esophageal, and intravesical drug delivery systems. Advanced healthcare materials. 2023;12(10):2202631.77. Kirtane AR, Abouzid O, Minahan D, Bensel T, Hill AL, Selinger C, et al. Development of an oral once-weekly drug delivery system for HIV antiretroviral therapy. Nature communications. 2018;9(1):2.78. Malachowski K, Breger J, Kwag HR, Wang MO, Fisher JP, Selaru FM, et al. Stimuli‐responsive theragrippers for chemomechanical controlled release. Angewandte Chemie International Edition. 2014;53(31):8045-9.79. Lin M, Firoozi N, Tsai C-T, Wallace MB, Kang Y. 3D-printed flexible polymer stents for potential applications in inoperable esophageal malignancies. Acta biomaterialia. 2019;83:119-29.80. Melocchi A, Inverardi N, Uboldi M, Baldi F, Maroni A, Pandini S, et al. Retentive device for intravesical drug delivery based on water-induced shape memory response of poly (vinyl alcohol): design concept and 4D printing feasibility. International journal of pharmaceutics. 2019;559:299-311.81. Pedron S, Van Lierop S, Horstman P, Penterman R, Broer D, Peeters E. Stimuli responsive delivery vehicles for cardiac microtissue transplantation. Advanced Functional Materials. 2011;21(9):1624-30.